QQ客服 官方微博 反馈留言

浏览/检索结果: 共4条，第1-4条 帮助 已选(0)清除 条数/页：5101520253035404550556065707580859095100   排序方式：请选择作者升序作者降序题名升序题名降序发表日期升序发表日期降序提交时间升序提交时间降序 Design and realization of catadioptric long wave infrared multiscale optical system 期刊论文 Infrared Physics and Technology, 2022, 卷号: 123 作者:  Yang, Shen;  Hu, Wang;  Yaoke, Xue;  Yang, Song;  Yongjie, Xie 收藏  |  浏览/下载：22/0  |  提交时间：2022/04/02 Multiscale optical system  The catadioptric system  Remote sensing  Imaging experiment of prototype   Design of reimaging F/1.0 long-wavelength infrared optical system (EI CONFERENCE) 会议论文 International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Infrared Imaging and Applications, May 24, 2011 - May 24, 2011, Beijing, China Zhang X.; Liu B.; Jia H.-G. 收藏  |  浏览/下载：27/0  |  提交时间：2013/03/25 A reimaging F/1.0 long-wavelength infrared optical system is proposed. The design has a flexible opto-mechanical layout. The design process is as follows. Firstly  the catadioptric reimaging system consists of two reflecting mirrors and a relay lenses. Two reflecting mirrors make up of the first imaging system and are therefore free of chromatic aberrations  while low dispersion lenses were used in the reimaging system  so the optical system do not need achromatic design for a high image quality. Then  to correct high-order aberrations resulting from large relative aperture  more parameters need to be used with aspheric or diffractive surfaces due to modern optic technology development. Here  aspheric is selected for easily manufacture. Finally  the design is completed with the help of ZEMAX software. The effective focal length of the objective is 120mm and the field of view (FOV) is 4. The simulated final design shows adequate image quality and the modulation transfer function (MTF) is close to diffraction limit. The effect of the surrounding environmental temperature is analyzed using the concept of thermal defocusing  and the thermal compensation is discussed. 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).   Design of aspherical surfaces for panoramic imagers using multipopulations genetic algorithm (EI CONFERENCE) 会议论文 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, November 19, 2008 - November 21, 2008, Chengdu, China Wang L.-P.; Liang Z.-Z.; Jin C.-S. 收藏  |  浏览/下载：18/0  |  提交时间：2013/03/25 A design method of aspherical surface for panoramic imaging system with two mirrors using multi-populations genetic algorithms is proposed. Astigmatism induced by mirrors may significantly compromise image resolution. To solve this problem  we induced algebraic expression of astigmatism in panoramic imager based on generalized Coddington equation and theory of geometric optics. Then  we propose an optimization process for mirror profile design to eliminate astigmatism and provide purposely-designed projection formula with aid of MPGA. A series of polynomial expressions of aspherical surfaces are obtained and procedures of the design are presented. In order to facilitate ray tracing and aberration calculation  even asphere surface model is obtained by using of hybrid schemes combining MPGA and damped least squares. Finally  a prototype of the catadioptric panoramic imager has been developed and panoramic ring image is obtained. 2009 SPIE.   Optical system of large relative aperture and wide field using aspheric corrector for detecting (EI CONFERENCE) 会议论文 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, November 19, 2008 - November 21, 2008, Chengdu, China Ming M.; Wang J.; Zhang J. 收藏  |  浏览/下载：15/0  |  提交时间：2013/03/25 The magnitude requirement of space target detecting determines that the image of detecting telescope should have several performances: small spots  the wider field of view  small 80% encircled energy diameter and good MTF(Modulation transfer function). So the aperture and field of view of optical system have some demands accordingly. The larger aperture  the more extensive range which the telescope searches. Now most of ground telescopes whose apertures are from 500mm to 1000mm is on-axis optical system  the more energy that telescope collects and higher magnitude the telescope detects  so wide field of view becomes the most importance problem. To obtain large relative aperture and wide field of view  the paper introduces a catadioptric telescope with small aperture aspheric refractive corrector  whose conic surface will be used to remove the aberrations due to large relative aperture and wide field of view. As to the optical system  there is only one aspheric refractive corrector  and it is relatively easy for manufacturing because of its concave figure and normal material. The paper gives the example  and optimizes this optical system with ZEMAX program. And then the paper provides a specific analysis program for testing the aspheric refractive corrector. The aperture of this optical system is 750mm  and its relative aperture is 0.82  and the field of view is 3.6 diameter(diagonal). Its structure is simple and the image quality is also very good. 2009 SPIE.