Research on the mechanical properties and frost resistance of aeolian sand 3D printed mortar | |
Wang, Hao1; Jiang, Minghui4; Hang, Meiyan1; Zhou, Gangming3; Sun, Mengjie1; Liu, Xiangju2 | |
刊名 | CASE STUDIES IN CONSTRUCTION MATERIALS |
2023-12-01 | |
卷号 | 19页码:16 |
关键词 | Aeolian sand 3D printed mortar Mechanical properties Frost resistance Freezing -thawing damage mechanism |
ISSN号 | 2214-5095 |
DOI | 10.1016/j.cscm.2023.e02332 |
通讯作者 | Jiang, Minghui(15310062855@163.com) |
英文摘要 | The purpose of this study is to use aeolian sand obtained from Inner Mongolia to partially replace quartz sand as fine aggregate to prepare 3D printed mortar to solve the scarcity problems of quartz sand resources in northwestern China. The mechanical properties tests (including flexural strength, compressive strength, tensile bond strength and axial compression tests) and frost resistance tests of cast specimens and printed mortar specimens in the X, Y and Z directions (abbreviated as CS, PS-X, PS-Y and PS-Z) were investigated. Furthermore, their microscopic morphology and pore structure parameters were compared and analyzed using scanning electron microscopy (SEM) and low field nuclear magnetic resonance (NMR), respectively. The results showed that the flexural strength and compressive strength of the samples following the inclined cross-path were superior to those following the Z-shaped path specimens. The tensile bonding strength of the CS, PS-X, PS-Y and PS-Z exhibited that F-3 > F-3X > F-3Z > F-3Y, and the peak stress was observed as F-4X > F-4 > F-4Z > F-4Y. This was attributed to the cement hydration of CS and PS-X being more sufficient than those of PS-Y and PS-Z. Furthermore, freezing-thawing cycles accelerated the degradation of aeolian sand 3D printed mortar specimens, increased their weight loss rate and porosities, as well as reduced relative dynamic modulus of elasticity. The porosities of specimens were as follows: PS-Y > PS-Z > PS-X > CS, and the porosity of PS-Y was 97.62 %, 36.07 % and 10.67 % higher than those of CS, PS-X and PS-Z, respectively. The significance of this research is to provide technical guidance and basis for the application of aeolian sand in 3D printed mortar in the future. |
资助项目 | National Natural Science Foundation of China[52168033] ; Shandong Provincial Natural Science Foundation[ZR2022QB128] ; Self Fund Project of Langfang Science and Technology[2023011046] |
WOS关键词 | HARDENED PROPERTIES ; CONCRETE ; CONSTRUCTION ; DETERIORATION ; PERFORMANCE ; GEOPOLYMER ; COMPOSITE ; STRENGTH |
WOS研究方向 | Construction & Building Technology ; Engineering ; Materials Science |
语种 | 英语 |
出版者 | ELSEVIER |
WOS记录号 | WOS:001050743700001 |
内容类型 | 期刊论文 |
源URL | [http://ir.qdio.ac.cn/handle/337002/182849] |
专题 | 海洋研究所_海洋腐蚀与防护研究发展中心 |
通讯作者 | Jiang, Minghui |
作者单位 | 1.Inner Mongolia Univ Sci & Technol, Sch Civil Engn, Baotou 014010, Inner Mongolia, Peoples R China 2.Chinese Acad Sci, Inst Oceanol, Key Lab Marine Environm Corros & Biofouling, Qingdao 266071, Peoples R China 3.Beijing Railway Sci Shougang Rail Technol Co Ltd, Beijing 102206, Peoples R China 4.Beijing Univ Technol, Fac Mat & Mfg, Key Lab Adv Funct Mat, Minist Educ, Beijing 100124, Peoples R China |
推荐引用方式 GB/T 7714 | Wang, Hao,Jiang, Minghui,Hang, Meiyan,et al. Research on the mechanical properties and frost resistance of aeolian sand 3D printed mortar[J]. CASE STUDIES IN CONSTRUCTION MATERIALS,2023,19:16. |
APA | Wang, Hao,Jiang, Minghui,Hang, Meiyan,Zhou, Gangming,Sun, Mengjie,&Liu, Xiangju.(2023).Research on the mechanical properties and frost resistance of aeolian sand 3D printed mortar.CASE STUDIES IN CONSTRUCTION MATERIALS,19,16. |
MLA | Wang, Hao,et al."Research on the mechanical properties and frost resistance of aeolian sand 3D printed mortar".CASE STUDIES IN CONSTRUCTION MATERIALS 19(2023):16. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论