Topographic relief and bedrock fractures caused by fault activity can accelerate surface erosion, suggesting that erosion rates increase with decreasing distance to the fault core. To test this hypothesis, we used Be-10 cosmogenic nuclides to quantify catchment-wide erosion rates at various distances from a fault in the footwall of the Daqing Shan fault system, a 200-km-long active normal fault in Inner Mongolia, northern China. In addition, in order to examine the influence of topography and bedrock fractures on the surface erosion processes in the fault-weakened zone, their relationships with hillslope erosion, fluvial sediment grain size and transport efficiency, erosion rates, and erosion coefficients were studied. The resulting catchment-wide erosion rates ranged from 0.01 +/- 0.00-0.13 +/- 0.01 mm yr(-1). These erosion rates and coefficients were unaffected by distance from the fault. The analysis of topography, bedrock fractures, and hillslope erosion yielded distinct hillslope erosion processes at different distances from the fault. Rapid mass wasting events, such as landslides, occurred at <15 km from the fault in steep, rocky hillslopes with abundant bedrock fractures. In contrast, at >15 km from the fault, hillslopes gradually become more gentle and soil-mantled. These spatial-slope configuration differences result in a decrease in sediment grain size delivered to river channels with increasing distance from the fault. Once sediments enter river channels, they impact fluvial transport capacity by influencing the initial motion threshold of sediment. Correlation analyses revealed that sediment transport efficiency in channels directly controls the catchment-averaged erosion rate and coefficient. This mechanism explains why the erosion rate remains insensitive to variations in topography and bedrock fractures in fault-weakened zones.