Variable thickness scroll compressor performance analysis - Part II: Dynamic modeling and model validation

doi:10.1177/0954408916642097

CORC > 兰州理工大学 > 兰州理工大学 > 机电工程学院

	Variable thickness scroll compressor performance analysis - Part II: Dynamic modeling and model validation
	Bin, Peng 1,3; Lemort, Vincent 4; Legros, Arnaud 4; Hongsheng, Zhang 1,3; Haifeng, Gong 2
刊名	Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
	2017-08-01
卷号	231 期号:4 页码:641-649
关键词	Dynamic models Experiments Mass transfer Mathematical models Thickness control Compressor modeling Compressor performance Discharge process Discharge temperature Experimental rigs Model validation performance Variable thickness
ISSN号	09544089
DOI	10.1177/0954408916642097
英文摘要	In order to investigate the performance of variable thickness scroll compressor, a detail mathematical modeling based on energy and mass balances is established in this two-part. In part II, dynamic modeling and model validation are developed. Temperature, pressure, mass flow of working chambers, friction loss power of moving parts, efficiency, and shaft power are investigated by solving the mathematical modeling. The experimental rig for variable thickness scroll compressor based on involute of circle, high order curve and arc is set up. From the comparison of the simulated and measured data, it can be seen that the compressor model predicts the mass flow, discharge temperature, and shaft power very well. So the proposed mathematical modeling can accurately describe all the suction, compression, and discharge processes for variable thickness scroll compressor. © IMechE 2015.
WOS研究方向	Engineering
语种	英语
出版者	SAGE Publications Ltd
WOS记录号	WOS:000406532800003
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/114955]
专题	机电工程学院
作者单位	1.School of Mechanical and Electronical Engineering, Lanzhou University of Technology, Lanzhou; 730050, China; 2.College of Mechanical Engineering, Chongqing University of Technology, Chongqing, China 3.Wenzhou PumpandValve Engin, Research Institute, Lanzhou University of Technology, Wenzhou, China; 4.University of Liege, Energy Systems Research Unit, Liege, Belgium;
推荐引用方式 GB/T 7714	Bin, Peng,Lemort, Vincent,Legros, Arnaud,et al. Variable thickness scroll compressor performance analysis - Part II: Dynamic modeling and model validation[J]. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering,2017,231(4):641-649.
APA	Bin, Peng,Lemort, Vincent,Legros, Arnaud,Hongsheng, Zhang,&Haifeng, Gong.(2017).Variable thickness scroll compressor performance analysis - Part II: Dynamic modeling and model validation.Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering,231(4),641-649.
MLA	Bin, Peng,et al."Variable thickness scroll compressor performance analysis - Part II: Dynamic modeling and model validation".Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 231.4(2017):641-649.