Performance evaluation of industrial ethernet and its modeling | |
Hao, XH; Wu, LZ | |
2004 | |
关键词 | Industrial Ethernet Networked Control Systems (NCS) Real-time LQG |
页码 | 527-531 |
英文摘要 | The real-time industrial network, often referred to as fieldbus, is an important approach for building automated manufacturing system. However, the application of fieldbus has been limited due to the high cost of hardware, moreover, a number of different fieldbus standards and each of them providing specific features, and the difficulty in interfacing with multi-vendor products. So it is difficult in integrating various fieldbus on the manufacturing floor. In order to solve these problems, the networked control system based on Ethernet is presented, in other words, the industrial automation field adopts Ethernet (IEEE802.3). The key technical obstacle for Ethernet for industrial application is that its non-deterministic behavior makes it inadequate for real-time application where the frames containing real-time information such as control command and alarm signal have to be delivered within a certain time limit. This paper first presents a comprehensive analysis of the temporal characteristics of traditional Ethernet and a new model of the Ethernet application in industry process is introduced. Two methods for performance improvement are presented in this dissertation. The first method tunes the network system parameters such as the prioritization of different subsystems or nodes and the choice of different types of network protocols. The second method is to design an optimal (LQG) controller on the premise of both theorems are derived based on Lyapunov's second method aimed the stability of the NCS based on Ethernet. At last, a scheme based on LQG controller is designed to achieve desired Real-time performance. The result illustrate that the effectiveness of the proposed control design and the satisfactory performance of the system. |
会议录 | ICIA 2004: Proceedings of 2004 International Conference on Information Acquisition |
会议录出版者 | IEEE |
会议录出版地 | 345 E 47TH ST, NEW YORK, NY 10017 USA |
语种 | 英语 |
WOS研究方向 | Automation & Control Systems ; Computer Science ; Instruments & Instrumentation |
WOS记录号 | WOS:000228481300124 |
内容类型 | 会议论文 |
源URL | [http://119.78.100.223/handle/2XXMBERH/38355] |
专题 | 电气工程与信息工程学院 |
通讯作者 | Hao, XH |
作者单位 | Lanzhou Univ Technol, Sch Elect & Informat Engn, Lanzhou 730050, Peoples R China |
推荐引用方式 GB/T 7714 | Hao, XH,Wu, LZ. Performance evaluation of industrial ethernet and its modeling[C]. 见:. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论