Effect of Cu Content on Microstructure and Tribological Properties of Ni-Based Directional Structure Alloy Coatings

CORC > 兰州理工大学 > 兰州理工大学 > 学报编辑部

	Effect of Cu Content on Microstructure and Tribological Properties of Ni-Based Directional Structure Alloy Coatings
	Yang, Xiaotian 1; Zhou, Jun 1; Wang, Xinhua 1; Wei, Hengli 1; Zeng, Rong 1; Yang, Qiangbin 2; Li, Wensheng 1
刊名	Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
	2022-04-01
卷号	51 期号:4 页码:1420-1426
关键词	Flame resistance Flame spraying Friction Microstructure Remelting Wear of materials Wear resistance Alloy coatings Composites coating Cu addition Cu content Cu element Directional structure coating Effects of Cu content Friction and wear performance Microstructures properties Tribological properties
ISSN号	1002-185X
英文摘要	The Cu-added Ni60/Cu directional structure composite coating was prepared by flame spraying+induction remelting+forced cooling composite technology. The effects of Cu content on the microstructure, phase evolution, microhardness and friction and wear properties of Ni60/Cu oriented structure coating were studied. The results show that the Cu element diffuses continuously into the grain during the formation of the directional structure coating, resulting in a continuous decrease in the hardness of the coating as the Cu content increases. The content of Cu has an important influence on the microstructure of the coating. When the Cu content is 15%, the directional structure of the coating shows a growth characteristic perpendicular to the interface, and the microstructure is fine and regular. The coating is mainly abrasive wear, which shows the lowest friction coefficient and the lowest wear rate, and gives full play to the friction reducing effect caused by Cu element when the Cu content is 15%. However, the excessive addition of Cu makes the wear resistance of the coating worse. © 2022, Science Press. All right reserved.
语种	中文
出版者	Science Press
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/158368]
专题	学报编辑部材料科学与工程学院
作者单位	1.State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou; 730050, China; 2.Chongqing Key Laboratory of Environmental Materials and Remediation Technology, College of Chemistry and Environmental Engineering, Chongqing University of Arts and Science, Chongqing; 402160, China
推荐引用方式 GB/T 7714	Yang, Xiaotian,Zhou, Jun,Wang, Xinhua,et al. Effect of Cu Content on Microstructure and Tribological Properties of Ni-Based Directional Structure Alloy Coatings[J]. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering,2022,51(4):1420-1426.
APA	Yang, Xiaotian.,Zhou, Jun.,Wang, Xinhua.,Wei, Hengli.,Zeng, Rong.,...&Li, Wensheng.(2022).Effect of Cu Content on Microstructure and Tribological Properties of Ni-Based Directional Structure Alloy Coatings.Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering,51(4),1420-1426.
MLA	Yang, Xiaotian,et al."Effect of Cu Content on Microstructure and Tribological Properties of Ni-Based Directional Structure Alloy Coatings".Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering 51.4(2022):1420-1426.