Effect of rolling deformation on microstructure and properties of Cu-Ni-Mo alloy prepared by aluminothermic reaction

doi:10.1142/S0217984921505102

CORC > 兰州理工大学 > 兰州理工大学 > 省部共建有色金属先进加工与再利用国家重点实验室

	Effect of rolling deformation on microstructure and properties of Cu-Ni-Mo alloy prepared by aluminothermic reaction
	Zheng, Yuehong; Zhao, He; Zhu, Sijia; La, Peiqing; Zhan, Faqi; Zhu, Min; Sheng, Jie; Liu, Haibin
刊名	MODERN PHYSICS LETTERS B
	2021-12-10
卷号	35 期号:34
关键词	Aluminothermic reaction copper alloy rolling mechanical property conductivity
ISSN号	0217-9849
DOI	10.1142/S0217984921505102
英文摘要	The metallic element Mo has almost no solid solubility in copper and can be used as a nucleation particle to refine the grain size and increase the recrystallization temperature of the alloy during solidification. It is expected to obtain copper alloys with good comprehensive properties by reasonably controlling the addition amount of Mo. However, it is difficult to prepare Cu-Mo alloys with uniform structure and there are few related literatures. In this paper, the aluminothermic reaction method, which has the advantages of simple process, low cost, and large size of the prepared alloy, was adopted, and a cluster model with the atomic ratio of Mo and Ni of 1:12 was introduced to design the alloy composition. Here, five alloys with different copper contents were prepared and followed by room temperature rolling with 40%, 60%, and 80% deformation. The results show that the as-cast Cu-Ni-Mo alloys exhibit good formability, have no macroscopic defects and present a small amount of precipitates. With the increase of alloy elements Ni and Mo, the hardness and strength of the alloys increase obviously, while the electrical conductivity decreases gradually. For the rolled alloys, a large number of lamellar deformed structures are formed, the grains are obviously refined, the precipitated phases are broken and the distribution is more uniform, thus the strength and hardness of the alloy increase significantly, the plasticity decrease significantly, while the conductivity changed little. In this study, high-strength samples were obtained, which may be a valuable exploration for the preparation of Cu-Ni-Mo alloy sheets with excellent microstructure and mechanical properties.
WOS研究方向	Physics
语种	英语
出版者	WORLD SCIENTIFIC PUBL CO PTE LTD
WOS记录号	WOS:000725602400012
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/150008]
专题	省部共建有色金属先进加工与再利用国家重点实验室材料科学与工程学院学科建设与学位办公室
作者单位	Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Peoples R China
推荐引用方式 GB/T 7714	Zheng, Yuehong,Zhao, He,Zhu, Sijia,et al. Effect of rolling deformation on microstructure and properties of Cu-Ni-Mo alloy prepared by aluminothermic reaction[J]. MODERN PHYSICS LETTERS B,2021,35(34).
APA	Zheng, Yuehong.,Zhao, He.,Zhu, Sijia.,La, Peiqing.,Zhan, Faqi.,...&Liu, Haibin.(2021).Effect of rolling deformation on microstructure and properties of Cu-Ni-Mo alloy prepared by aluminothermic reaction.MODERN PHYSICS LETTERS B,35(34).
MLA	Zheng, Yuehong,et al."Effect of rolling deformation on microstructure and properties of Cu-Ni-Mo alloy prepared by aluminothermic reaction".MODERN PHYSICS LETTERS B 35.34(2021).