Microstructure Characteristics in the Pulsed Laser Welding Joint of Zr-based BMG and 304L Stainless Steel | |
Chen, Huizi2; Huang, Jiankang1,2; Liu, Shi'en1; Yu, Xiaoquan1; Fan, Ding1 | |
刊名 | Cailiao Daobao/Materials Reports |
2020-08-25 | |
卷号 | 34期号:16页码:16100-16103 |
关键词 | Beryllium alloys Beryllium metallography Binary alloys Copper alloys Copper metallography Glass Heat affected zone Iron metallography Metallic glass Microstructure Nickel metallography Nickel steel Pulsed lasers Scanning electron microscopy Spectrometers Titanium alloys Titanium metallography Vickers hardness Welding X ray diffraction Zircaloy Zirconium metallography 304L stainless steel Chemical compositions Crystallization zone Energy dispersive spectrometers Field emission scanning electron microscopes Microstructure characteristics Partial crystallization Zr based bulk metallic glass |
ISSN号 | 1005023X |
DOI | 10.11896/cldb.19080017 |
英文摘要 | Using pulsed laser welding method, the connection between Zr44Ti11Ni10Cu10Be25 (at%) bulk metallic glass and 304L stainless steel plate was realized. The microstructures and chemical compositions of different regions of weld joint were characterized by field emission scanning electron microscope, energy dispersive spectrometer and X-ray diffraction. Three different crystallization zones were formed due to different coo-ling rates. The weld joint consists of partial crystallization zone (heat affected zone, weld zone and 304L stainless steel/weld zone interface) and amorphous zone (Zr-based bulk metallic glass base metal). Petal-like and small-particle crystallization occurs in heat affected zone. The intensity of diffraction peaks in X-ray diffraction pattern is very small. Some cross-snowflake crystallization appear in weld zone. The diffraction peaks correspond to Zr2Cu and Zr2Fe phases. A large number of sharp crystal peaks appear in XRD pattern at 304L stainless steel/weld zone interface. The results show that the crystallization fractions of heat affected zone, weld zone and 304L stainless steel/weld zone interface are 1.4%, 10.0% and 27.4%, respectively. The Vickers hardness of the crystalline microstructure formed in the weld zone is the highest. The diffusion layer formed between BMG and weld zone indicates that Zr migrates to weld zone through diffusion layer during welding. © 2020, Materials Review Magazine. All right reserved. |
语种 | 中文 |
出版者 | Cailiao Daobaoshe/ Materials Review |
内容类型 | 期刊论文 |
源URL | [http://ir.lut.edu.cn/handle/2XXMBERH/114982] |
专题 | 材料科学与工程学院 |
作者单位 | 1.State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou; 730050, China 2.School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou; 730050, China; |
推荐引用方式 GB/T 7714 | Chen, Huizi,Huang, Jiankang,Liu, Shi'en,et al. Microstructure Characteristics in the Pulsed Laser Welding Joint of Zr-based BMG and 304L Stainless Steel[J]. Cailiao Daobao/Materials Reports,2020,34(16):16100-16103. |
APA | Chen, Huizi,Huang, Jiankang,Liu, Shi'en,Yu, Xiaoquan,&Fan, Ding.(2020).Microstructure Characteristics in the Pulsed Laser Welding Joint of Zr-based BMG and 304L Stainless Steel.Cailiao Daobao/Materials Reports,34(16),16100-16103. |
MLA | Chen, Huizi,et al."Microstructure Characteristics in the Pulsed Laser Welding Joint of Zr-based BMG and 304L Stainless Steel".Cailiao Daobao/Materials Reports 34.16(2020):16100-16103. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论