Characteristics of molybdenum coating prepared by electro-thermal explosion spraying with constraining tube

CORC > 兰州理工大学 > 兰州理工大学 > 省部共建有色金属先进加工与再利用国家重点实验室

	Characteristics of molybdenum coating prepared by electro-thermal explosion spraying with constraining tube
	Zhu, Liang; Qiao, Hetao; Zhang, Pengfei; Bi, Xuesong; Zhao, Jinfeng
刊名	Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
	2013-07-01
卷号	42 期号:7 页码:1488-1491
关键词	Coatings Diffusion bonding Explosions Liquids Molybdenum Morphology Surface morphology Bonding strength Charging voltage Electrical explosion spraying Explosion products Molybdenum coatings Spraying distance Thermal explosion Wire feeding
ISSN号	1002185X
英文摘要	With variations of initial charging voltage and spraying distance, Mo coatings were prepared by electro-thermal explosion spraying with a constraining tube. The bonding strength, surface morphology and cross-section characteristics of the coating were analyzed. The results show that the coating is formed by liquid metal within a certain spraying distance. Based on the standard of VDI3198, the bonding strength grade of liquid spraying coating belongs to HF-1~HF-3. With the spraying distance increases, the proportion of solid particles in the explosion products increases, the bonding strength grade of the coatings decreases. The increase of initial charging voltage can decrease the maximum spraying distance of the liquid spraying coating. Copyright © 2013 Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights reserved.
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
语种	中文
出版者	Rare Metals Materials and Engineering Press
WOS记录号	WOS:000323016700035
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/113310]
专题	省部共建有色金属先进加工与再利用国家重点实验室材料科学与工程学院
作者单位	State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China
推荐引用方式 GB/T 7714	Zhu, Liang,Qiao, Hetao,Zhang, Pengfei,et al. Characteristics of molybdenum coating prepared by electro-thermal explosion spraying with constraining tube[J]. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering,2013,42(7):1488-1491.
APA	Zhu, Liang,Qiao, Hetao,Zhang, Pengfei,Bi, Xuesong,&Zhao, Jinfeng.(2013).Characteristics of molybdenum coating prepared by electro-thermal explosion spraying with constraining tube.Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering,42(7),1488-1491.
MLA	Zhu, Liang,et al."Characteristics of molybdenum coating prepared by electro-thermal explosion spraying with constraining tube".Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering 42.7(2013):1488-1491.