Microstructure and densification mechanism of Fe-Cu based diamond composite ultra thin sawing matrixes at different cold pressures

CORC > 兰州理工大学 > 兰州理工大学 > 省部共建有色金属先进加工与再利用国家重点实验室

	Microstructure and densification mechanism of Fe-Cu based diamond composite ultra thin sawing matrixes at different cold pressures
	Li, Wen-Sheng; Dong, Hong-Feng; Lu, Yang; Zhang, Jie; Chu, Ke
刊名	Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals
	2013-07-01
卷号	23 期号:6 页码:1523-1529
关键词	Binary alloys Compaction Copper alloys Densification Diamonds Friction Microhardness Microstructure Powders Sawing Archimedes principle Cu-based matrix Densification mechanisms Diamond composites Microhardness tester Non-uniform deformation Ultra-thin Uniaxial compaction
ISSN号	10040609
英文摘要	A green sample of Fe-Cu-based diamond composite ultra thin sawing matrixes was prepared by cold uniaxial compaction technology at different cold pressures using Cu-Fe based single element mixed powder as raw materials. The microstructure, density and densification mechanism of the green were investigated by microhardness tester, Archimedes principle, OM and SEM. The results show that the non uniform deformation and changing friction force of inter-powders in green samples occur with increasing pressure, which determines bonding mode, microhardness, arrangement of powders and green densities.
语种	中文
出版者	Central South University of Technology
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/113198]
专题	省部共建有色金属先进加工与再利用国家重点实验室材料科学与工程学院机电工程学院
作者单位	State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China
推荐引用方式 GB/T 7714	Li, Wen-Sheng,Dong, Hong-Feng,Lu, Yang,et al. Microstructure and densification mechanism of Fe-Cu based diamond composite ultra thin sawing matrixes at different cold pressures[J]. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals,2013,23(6):1523-1529.
APA	Li, Wen-Sheng,Dong, Hong-Feng,Lu, Yang,Zhang, Jie,&Chu, Ke.(2013).Microstructure and densification mechanism of Fe-Cu based diamond composite ultra thin sawing matrixes at different cold pressures.Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals,23(6),1523-1529.
MLA	Li, Wen-Sheng,et al."Microstructure and densification mechanism of Fe-Cu based diamond composite ultra thin sawing matrixes at different cold pressures".Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals 23.6(2013):1523-1529.