Meshing Error of Elliptic Cylinder Gear Based on Tooth Contact Analysis

doi:10.5829/ije.2020.33.07a.24

CORC > 兰州理工大学 > 兰州理工大学

	Meshing Error of Elliptic Cylinder Gear Based on Tooth Contact Analysis
	Changbin, D.; Yongping, L.; Yongqiao, W.
刊名	INTERNATIONAL JOURNAL OF ENGINEERING
	2020-07-01
卷号	33 期号:7 页码:1364-1374
关键词	Elliptical Cylinder Gear Static Contact Finite Element Analysis Dynamic Meshing Characteristics Meshing Error
ISSN号	1025-2495
DOI	10.5829/ije.2020.33.07a.24
英文摘要	In order to study the dynamic meshing characteristics of the elliptic cylinder gear and obtain the meshing error of the gear transmission system, the two-dimensional static contact analysis of the gear tooth surface is carried out using ANSYS software, and the key parts of the contact area of the tooth surface are determined. Then, the dynamic meshing model of the elliptic cylinder gear is established and the dynamic contact process under load is simulated by ANSYS LS-DYNA software. The distribution law of effective plastic strain, effective stress and pressure of the driving and driven wheels are obtained. On this basis, the distribution law of meshing error is obtained by calculation. The results show that the distribution of stress, strain and tooth surface pressure during tooth meshing is related to the position of the tooth on the elliptical pitch curve. The position of the tooth on the pitch curve and the load it bears has a certain influence on the meshing error. The results of this research can provide some guidance for subsequent study of transmission error of non-circular gears, gears modification and engineering applications.
WOS研究方向	Engineering
语种	英语
出版者	MATERIALS & ENERGY RESEARCH CENTER-MERC
WOS记录号	WOS:000552795100024
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/155636]
专题	兰州理工大学
作者单位	Lanzhou Univ Technol, Sch Mech & Elect Engn, Lanzhou, Peoples R China
推荐引用方式 GB/T 7714	Changbin, D.,Yongping, L.,Yongqiao, W.. Meshing Error of Elliptic Cylinder Gear Based on Tooth Contact Analysis[J]. INTERNATIONAL JOURNAL OF ENGINEERING,2020,33(7):1364-1374.
APA	Changbin, D.,Yongping, L.,&Yongqiao, W..(2020).Meshing Error of Elliptic Cylinder Gear Based on Tooth Contact Analysis.INTERNATIONAL JOURNAL OF ENGINEERING,33(7),1364-1374.
MLA	Changbin, D.,et al."Meshing Error of Elliptic Cylinder Gear Based on Tooth Contact Analysis".INTERNATIONAL JOURNAL OF ENGINEERING 33.7(2020):1364-1374.