CORC  > 兰州理工大学  > 兰州理工大学
Comparative study on anti-corrosion electrochemical response of micro-arc oxidation coatings with different thicknesses under high and low voltage
Le, Sun2; Ying, Ma2; Ling-Yun, An2; Xing-Ping, Wang2; Wei, Gao1
刊名Surface Technology
2021
卷号50期号:1页码:364-374
关键词Cyclic voltammetry Deterioration Electrochemical corrosion Electrochemical impedance spectroscopy Electrolytes Magnesium alloys Magnesium metallography Polarization Silicates Anti-corrosion property Anticorrosion performance AZ91D magnesium alloys Corrosion current densities Electrochemical testing Linear polarization resistance Micro-arc oxidation coatings Potentiodynamic polarization tests
DOI10.16490/j.cnki.issn.1001-3660.2021.01.033
英文摘要The aim is to study the anti-corrosion electrochemical responses of micro-arc oxidation (MAO) coatings with different thicknesses contrastively. AZ91D magnesium alloys were treated in silicate-containing electrolyte by adjusting the voltage in order to obtain MAO coatings with different thicknesses, the microstructure, element and phase composition of these coatings were studied by using SEM, EPMA and XRD, respectively. And the anti-corrosion electrochemical responses of the coatings were studied contrastively by cyclic voltammetry (CV), potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS). Anti-corrosion property of AZ91D magnesium alloys is significantly improved after MAO treatment, and the anti-corrosion electrochemical responses of the coatings with different thicknesses vary. Compared with the thin coating prepared under low voltage, the closed ring area surrounded by the CV curve and the corrosion current density of the thick coating prepared under high voltage both reduce about one order of magnitude, and its linear polarization resistance increases approximately 3.7 times. Meanwhile, its impedance modulus is higher and thus it exhibits more superior anti-corrosion performance. At the same time, the corrosion processes of two kinds of coatings are different, which can be divided into two stages for the thick coating, namely, the corrosive medium gradually penetrates into the coating, and then down to the interface between the coating and the substrate, eroding the substrate. While the deterioration of the thin coating mainly experiences three stages: The corrosive medium gradually infiltrates into the coating and penetrates through the coating/substrate interface, then corrodes the substrate, and finally the coating completely fails. In conclusion, the thick MAO coating has weak corrosion tendency and excellent anti-corrosion property, which is supported by the above three electrochemical testing results that reveal the corrosion process and mechanism of the thick coating with different degree respectively. © 2021, Chongqing Wujiu Periodicals Press. All rights reserved.
语种中文
出版者Chongqing Wujiu Periodicals Press
内容类型期刊论文
源URL[http://ir.lut.edu.cn/handle/2XXMBERH/147714]  
专题兰州理工大学
作者单位1.Faculty of Engineering, The University of Auckland, Auckland; 1142, New Zealand
2.Province-ministry Co-constructed State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou; 730050, China;
推荐引用方式
GB/T 7714
Le, Sun,Ying, Ma,Ling-Yun, An,et al. Comparative study on anti-corrosion electrochemical response of micro-arc oxidation coatings with different thicknesses under high and low voltage[J]. Surface Technology,2021,50(1):364-374.
APA Le, Sun,Ying, Ma,Ling-Yun, An,Xing-Ping, Wang,&Wei, Gao.(2021).Comparative study on anti-corrosion electrochemical response of micro-arc oxidation coatings with different thicknesses under high and low voltage.Surface Technology,50(1),364-374.
MLA Le, Sun,et al."Comparative study on anti-corrosion electrochemical response of micro-arc oxidation coatings with different thicknesses under high and low voltage".Surface Technology 50.1(2021):364-374.
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace