Study on the method of typical defects in butt welding of 20 steel

doi:10.4028/www.scientific.net/AMM.456.421

CORC > 兰州理工大学 > 兰州理工大学

	Study on the method of typical defects in butt welding of 20 steel
	Zhang, Peng Lin 1,2; Zhao, Zhi Qiang 1,2; Sang, Yuan 1,2; Xu, Ya Xing 1,2
	2014
会议日期	November 23, 2013 - November 24, 2013
会议地点	Shiyan, Hubei, China
关键词	Chemical industry Cracks Nondestructive examination Butt Learning and understanding Magnetic particle inspection Magnetic particle testing Near-surface defects Non-destructive test Quantification methods Risk of accidents
卷号	456
DOI	10.4028/www.scientific.net/AMM.456.421
页码	421-424
英文摘要	Non-destructive test in the power, petroleum, chemical industry, aviation, aerospace, marine, etc have been widely used in the field, that can more accurately detect magnetic products and the workpiece surface and internal defects, can effectively reduce the risk of accidents from happening. Methods for magnetic particle testing beginners the defects on the surface and near-surface defects of the learning and understanding of needs, effectively grasp of crack defects identification and quantification methods, articles to the typical method of crack defect detection were studied, produced can be used for comparison of magnetic particle inspection of training and engineering, defect rate of 80%. © (2014) Trans Tech Publications, Switzerland.
会议录	Applied Mechanics and Materials
会议录出版者	Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
语种	英语
ISSN号	16609336
内容类型	会议论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/117772]
专题	兰州理工大学
作者单位	1.Key Laboratory of New Nonferrous Metal Materials of Gansu Province, Lanzhou University of Technonlgy, Lanzhou 730050, China 2.MOE Key Laboratory of Nonferrous Alloys and Processing, Lanzhou University of Technology, Lanzhou 730050, China;
推荐引用方式 GB/T 7714	Zhang, Peng Lin,Zhao, Zhi Qiang,Sang, Yuan,et al. Study on the method of typical defects in butt welding of 20 steel[C]. 见:. Shiyan, Hubei, China. November 23, 2013 - November 24, 2013.