An investigation on vacuum brazing of dissimilar nonferrous metals of Cu and Al | |
Yu, Wei Yuan; Xia, Tian Dong; Ding, Wan Wu; Wang, Xiao Jun; Zhao, Wen Jun | |
2013 | |
会议日期 | March 30, 2013 - March 31, 2013 |
会议地点 | Dalian, China |
关键词 | Aluminum Brazing Copper Microstructure Silicon Vacuum brazing Average width Cu substrate Metal compounds Microstructure morphologies |
卷号 | 690 693 |
DOI | 10.4028/www.scientific.net/AMR.690-693.2565 |
页码 | 2565-2569 |
英文摘要 | The writer successfully obtained brazed Cu-Al joint by using vacuum brazing method, and also conducted an analysis for the microstructure morphology of the joint. The result shows that: The interface of the brazed Cu-Al joint includes three parts---the transition area on the Cu side, the central brazing seam area and the transition area on the Al side. Formed between the brazing seam area and the Cu substrate are the Cu3Al2 and CuAl2 layers, and the average width of the transition area of Cu3Al2 is 12 μm while that of CuAl2 8 μm. The brazing seam area is mainly composed of α-Al solid solution, Cu3Al2 and CuAl2 metal compounds, in addition, the Ε-Cu15Si4 phase, the Al-Si phase and CuZn2 phase are also formed. These phases present themselves in the state of acicular compounds, which are dispersed in the brazing seam area. © (2013) Trans Tech Publications, Switzerland. |
会议录 | Advanced Materials Research |
会议录出版者 | Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland |
语种 | 英语 |
ISSN号 | 10226680 |
内容类型 | 会议论文 |
源URL | [http://ir.lut.edu.cn/handle/2XXMBERH/117428] |
专题 | 兰州理工大学 省部共建有色金属先进加工与再利用国家重点实验室 |
作者单位 | State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China |
推荐引用方式 GB/T 7714 | Yu, Wei Yuan,Xia, Tian Dong,Ding, Wan Wu,et al. An investigation on vacuum brazing of dissimilar nonferrous metals of Cu and Al[C]. 见:. Dalian, China. March 30, 2013 - March 31, 2013. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论