Dry sliding friction and wear behaviour of hardened AISI D2 tool steel with different hardness levels

doi:10.1016/j.triboint.2013.05.006

CORC > 兰州理工大学 > 兰州理工大学

	Dry sliding friction and wear behaviour of hardened AISI D2 tool steel with different hardness levels
	Tang, Linhu 1; Gao, Chengxiu 1; Huang, Jianlong 2; Zhang, Hongyan 1; Chang, Wenchun 1
刊名	TRIBOLOGY INTERNATIONAL
	2013-10
卷号	66 页码:165-173
关键词	Sliding speed Hardness Friction coefficient Wear rate
ISSN号	0301-679X
DOI	10.1016/j.triboint.2013.05.006
英文摘要	The influence of the sliding speed and hardness on the friction and wear performance, and their related mechanisms of hardened tool steel AISI D2 with different hardness levels were investigated. Friction and wear tests of the estimated specimens with different hardness levels versus Si3N4 balls were carried out under dry sliding friction condition in ball-on-disc tester. The results showed that the influence of the hardness on the friction coefficient at the sliding speeds of 0.05 and 0.5 m/s is more prominent than that at 0.10 m/s, while the wear rate shows great sensitivity to the sliding speed and hardness. (C) 2013 Elsevier Ltd. All rights reserved.
WOS研究方向	Engineering
语种	英语
出版者	ELSEVIER SCI LTD
WOS记录号	WOS:000324358700020
状态	已发表
内容类型	期刊论文
源URL	[http://119.78.100.223/handle/2XXMBERH/34621]
专题	兰州理工大学机电工程学院
通讯作者	Tang, Linhu
作者单位	1.Lanzhou Inst Technol, Dept Mech Engn, Lanzhou, Peoples R China 2.Lanzhou Univ Technol, Coll Mechanoelect, Lanzhou, Peoples R China
推荐引用方式 GB/T 7714	Tang, Linhu,Gao, Chengxiu,Huang, Jianlong,et al. Dry sliding friction and wear behaviour of hardened AISI D2 tool steel with different hardness levels[J]. TRIBOLOGY INTERNATIONAL,2013,66:165-173.
APA	Tang, Linhu,Gao, Chengxiu,Huang, Jianlong,Zhang, Hongyan,&Chang, Wenchun.(2013).Dry sliding friction and wear behaviour of hardened AISI D2 tool steel with different hardness levels.TRIBOLOGY INTERNATIONAL,66,165-173.
MLA	Tang, Linhu,et al."Dry sliding friction and wear behaviour of hardened AISI D2 tool steel with different hardness levels".TRIBOLOGY INTERNATIONAL 66(2013):165-173.