Study on assembly pressure of molten carbonate fuel cells based on in-situ sintered model

	Study on assembly pressure of molten carbonate fuel cells based on in-situ sintered model
	Wang, Pengjie 1,2; Liu, Sa 1,2; Zhou, Li 1; Shao, Zhigang 1; Yi, Baolian 1
刊名	international journal of hydrogen energy
	2013-05-20
卷号	38 期号:15 页码:6503-6508
关键词	Molten carbon fuel cells Environment-friendly Sintered model Matrices
通讯作者	周利 ; 邵志刚
产权排序	1,1
英文摘要	an in-situ sintered model of molten carbonate fuel cells (mcfcs) with environment-friendly aqueous matrices was proposed in order to optimize the performance of mcfc unit cell. the optimum assembly pressure range was settled based on the sintered model. moreover, an environment-friendly aqueous alpha-lialo2 matrix was fabricated by a tape-casting process using distilled water as solvent and was applied into mcfc successfully. the obtained single drying green sheet had a thickness of 200-300 mu m, no defects, and good workability. the microstructure of the alpha-lialo2 required in an mcfc was obtained using this method. in this work, the mcfc using the matrices was assembled and tested. the output power density could reach 149.2 mw cm(-2) at the current density of 200 ma cm(-2) when the assemble pressure was 7.01 mpa. copyright (c) 2013, hydrogen energy publications, llc. published by elsevier ltd. all rights reserved.
学科主题	物理化学
WOS标题词	science & technology ; physical sciences ; technology
类目[WOS]	chemistry, physical ; electrochemistry ; energy & fuels
研究领域[WOS]	chemistry ; electrochemistry ; energy & fuels
关键词[WOS]	electrolyte matrix ; performance ; stability ; lialo2
收录类别	SCI
语种	英语
WOS记录号	WOS:000319233000025
公开日期	2013-10-11
内容类型	期刊论文
源URL	[http://159.226.238.44/handle/321008/117605]
专题	大连化学物理研究所_中国科学院大连化学物理研究所
作者单位	1.Chinese Acad Sci, Dalian Inst Chem Phys, Fuel Cell Syst & Engn Lab, Dalian 116023, Liaoning, Peoples R China 2.Chinese Acad Sci, Grad Univ, Beijing 100049, Peoples R China
推荐引用方式 GB/T 7714	Wang, Pengjie,Liu, Sa,Zhou, Li,et al. Study on assembly pressure of molten carbonate fuel cells based on in-situ sintered model[J]. international journal of hydrogen energy,2013,38(15):6503-6508.
APA	Wang, Pengjie,Liu, Sa,Zhou, Li,Shao, Zhigang,&Yi, Baolian.(2013).Study on assembly pressure of molten carbonate fuel cells based on in-situ sintered model.international journal of hydrogen energy,38(15),6503-6508.
MLA	Wang, Pengjie,et al."Study on assembly pressure of molten carbonate fuel cells based on in-situ sintered model".international journal of hydrogen energy 38.15(2013):6503-6508.