Tool Orientation Optimization and Path Planning for 5-Axis Machining

doi:10.1007/s11424-020-9270-1

	Tool Orientation Optimization and Path Planning for 5-Axis Machining
	Yuan, Chunming 1,2; Mi, Zhenpeng 1,2; Jia, Xiaohong 1,2; Lin, Fengming 1; Shen, Liyong 1
刊名	JOURNAL OF SYSTEMS SCIENCE & COMPLEXITY
	2020-09-09
页码	24
关键词	5-axis CNC machining flat end cutter tool path planning tool posture optimization
ISSN号	1009-6124
DOI	10.1007/s11424-020-9270-1
英文摘要	Tool path generation is a fundamental problem in 5-axis CNC machining, which consists of tool orientation planning and cutter-contact (CC) point planning. The planning strategy highly depends on the type of tool cutters. For ball-end cutters, the tool orientation and CC point location can be planned separately; while for flat end cutters, the two are highly dependent on each other. This paper generates a smooth tool path of workpiece surfaces for flat end mills from two stages: Computing smooth tool orientations on the surface without gouging and collisions and then designing the CC point path. By solving the tool posture optimization problem the authors achieve both the path smoothness and the machining efficiency. Experimental results are provided to show the effectiveness of the method.
资助项目	National Natural Science Foundation of China[11688101] ; National Natural Science Foundation of China[61872332] ; Beijing National Natural Science Foundation[Z190004] ; National Center for Mathematics and Interdisciplinary Sciences ; Youth Innovation Promotion Association of the Chinese Academy of Sciences
WOS研究方向	Mathematics
语种	英语
出版者	SPRINGER HEIDELBERG
WOS记录号	WOS:000567745200010
内容类型	期刊论文
源URL	[http://ir.amss.ac.cn/handle/2S8OKBNM/52145]
专题	中国科学院数学与系统科学研究院
通讯作者	Shen, Liyong
作者单位	1.Univ Chinese Acad Sci, Sch Math Sci, Beijing 100049, Peoples R China 2.Chinese Acad Sci, Acad Math & Syst Sci, KLMM, Beijing 100190, Peoples R China
推荐引用方式 GB/T 7714	Yuan, Chunming,Mi, Zhenpeng,Jia, Xiaohong,et al. Tool Orientation Optimization and Path Planning for 5-Axis Machining[J]. JOURNAL OF SYSTEMS SCIENCE & COMPLEXITY,2020:24.
APA	Yuan, Chunming,Mi, Zhenpeng,Jia, Xiaohong,Lin, Fengming,&Shen, Liyong.(2020).Tool Orientation Optimization and Path Planning for 5-Axis Machining.JOURNAL OF SYSTEMS SCIENCE & COMPLEXITY,24.
MLA	Yuan, Chunming,et al."Tool Orientation Optimization and Path Planning for 5-Axis Machining".JOURNAL OF SYSTEMS SCIENCE & COMPLEXITY (2020):24.