Casting process design and practice for coolant pump impeller in AP1000 nuclear power station | |
Zhao, Ping1; Liu, Zhong-li2; Wang, Gui-quan2; Liu, Peng3 | |
刊名 | CHINA FOUNDRY |
2020-03-01 | |
卷号 | 17期号:2页码:173-177 |
关键词 | AP1000 coolant pump impeller casting process TG142 71 A |
ISSN号 | 1672-6421 |
DOI | 10.1007/s41230-020-9164-9 |
通讯作者 | Liu, Zhong-li(liuzhongli@ytu.edu.cn) |
英文摘要 | The coolant pump impeller casting is the only rotating component in the nuclear island of an AP1000 nuclear power station, and is required to have a 60-year service time, which requires advanced materials and processing technologies to guarantee. In this paper, the casting process was studied, designed and modifed by means of numerical simulation. The gating system was distributed symmetrically and the runner diameter was a little bigger for avoiding sand wash and turbulence; the feeding system focused on the solution of blades feeding, as some parts of which should reach Severity Level 1 radioactive testing standard. Therefore, upper and lower plates cooperating with chillers acted as feeding method besides additional 2-3 times thickness; in addition, lowering sand core strength, decreasing pouring temperature and increasing dimension allowance would be adopted to avoid crack defects. Finally, the pilot impeller was cast. The results show that the casting process design is reasonable, as the liquid rises very smoothly when pouring, and no volume defects are found by means of 100% radioactive testing. Based on this casting process, 16 coolant pump impellers have been successfully produced and delivered to customers. |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | SPRINGER SINGAPORE PTE LTD |
WOS记录号 | WOS:000529360400011 |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/138616] |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Liu, Zhong-li |
作者单位 | 1.Qingdao Univ Sci & Technol, Coll Mat Sci & Engn, Qingdao 266044, Peoples R China 2.Yantai Univ, Sch Nucl Equipment & Nucl Engn, Yantai 264005, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
推荐引用方式 GB/T 7714 | Zhao, Ping,Liu, Zhong-li,Wang, Gui-quan,et al. Casting process design and practice for coolant pump impeller in AP1000 nuclear power station[J]. CHINA FOUNDRY,2020,17(2):173-177. |
APA | Zhao, Ping,Liu, Zhong-li,Wang, Gui-quan,&Liu, Peng.(2020).Casting process design and practice for coolant pump impeller in AP1000 nuclear power station.CHINA FOUNDRY,17(2),173-177. |
MLA | Zhao, Ping,et al."Casting process design and practice for coolant pump impeller in AP1000 nuclear power station".CHINA FOUNDRY 17.2(2020):173-177. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论