Evaluation of numerical and experimental investigations on the hybrid sheet hydroforming process to produce a novel high-capacity engine oil pan | |
Chen, Dayong1,2; Xu, Yong1,2,3; Zhang, Shihong1,2; Zhao, Zhangjian4; El-Aty, Ali Abd1; Ma, Yan1; Li, Jingming4 | |
刊名 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2018-08-01 | |
卷号 | 97期号:9-12页码:3625-3636 |
关键词 | High-capacity engine oil pan Hydromechanical deep drawing Hydro-bulging Hybrid sheet hydroforming FEM |
ISSN号 | 0268-3768 |
DOI | 10.1007/s00170-018-2124-5 |
通讯作者 | Xu, Yong(yxu@imr.ac.cn) |
英文摘要 | The engine oil pan is used for restraining pollutant and gathering greasing oil from the engine components' surface which is significant for thermal dissipation and preventing deterioration of oil quality. The study intended to investigate and develop a hybrid sheet hydroforming process for fabricating an innovative high-capacity oil pan that has the characters of asymmetrical cavity depth and major lateral bulging. Firstly, a two-stage hydromechanical deep drawing (HMDD) process was accomplished, which included precedingly regional and eventually integral deep drawing assisted by fluid counter force. The finite element modeling (FEM) was employed to study the impact of the die fillet dimension as well as the loading routes on the formability of the preformed part. The limited drawing ratio can be enhanced from 2.34 to 2.77 for AISI 304 by HMDD. Hydro-bulging was subsequently investigated by the simulations accompanied by the relatively experimental verification. Both the simulated and experimental results showed that there is a remarkable influence of lubrication condition and intermediate heat treatment on the formability of the final part. The cracks occurred at the corners of the main bulging area can be alleviated by reduction of friction coefficient. Furthermore, wrinkles and cracks have been completely eliminated and the thinning ratio can be reduced to 31.8% for the final part, when intermediate heat treatment is additionally employed. It was concluded that the present hybrid sheet hydroforming process is feasible and sufficient to manufacture a sound engine oil pan without any defects through the optimization of the process parameters. |
资助项目 | External Cooperation Program of BIC, Chinese Academy of Sciences[174321KYS820150020] ; Shenyang Science and Technology Program[17-32-6-00] ; State Key Laboratory of Mechanical System and Vibration[MSV201708] ; Jiangsu Province Science and Technology Program[BE2016156] ; State Key Laboratory of Solidification Processing in NWPU[SKLSP201746] |
WOS研究方向 | Automation & Control Systems ; Engineering |
语种 | 英语 |
出版者 | SPRINGER LONDON LTD |
WOS记录号 | WOS:000439136700037 |
资助机构 | External Cooperation Program of BIC, Chinese Academy of Sciences ; Shenyang Science and Technology Program ; State Key Laboratory of Mechanical System and Vibration ; Jiangsu Province Science and Technology Program ; State Key Laboratory of Solidification Processing in NWPU |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/135911] |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Xu, Yong |
作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Anhui, Peoples R China 3.Nanjing Univ Sci & Technol, Sch Mat Sci & Engn, Nano & Heterogenious Mat Ctr, Nanjing 210094, Jiangsu, Peoples R China 4.Henan Xingdi Forging Equipment Mfg Co Ltd, Xinxiang 453600, Peoples R China |
推荐引用方式 GB/T 7714 | Chen, Dayong,Xu, Yong,Zhang, Shihong,et al. Evaluation of numerical and experimental investigations on the hybrid sheet hydroforming process to produce a novel high-capacity engine oil pan[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,97(9-12):3625-3636. |
APA | Chen, Dayong.,Xu, Yong.,Zhang, Shihong.,Zhao, Zhangjian.,El-Aty, Ali Abd.,...&Li, Jingming.(2018).Evaluation of numerical and experimental investigations on the hybrid sheet hydroforming process to produce a novel high-capacity engine oil pan.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,97(9-12),3625-3636. |
MLA | Chen, Dayong,et al."Evaluation of numerical and experimental investigations on the hybrid sheet hydroforming process to produce a novel high-capacity engine oil pan".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 97.9-12(2018):3625-3636. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论