Effect of residual hydrogen content on the tensile properties and crack propagation behavior of a type 316 stainless steel | |
Li Xiaobing1,2; Gao Ming1,2; Li Haoze1,2; Xing Weiwei1,2; Zhang Long1,2; Shu Lei1,2; Zhao Xiujuan1,2; Ma Yingche1,2; Liu Kui1,2 | |
刊名 | INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
2019-09-20 | |
卷号 | 44期号:45页码:25054-25063 |
关键词 | 316 austenitic stainless steel Hydrogen embrittlement Slow strain rate test (SSRT) Fatigue crack propagation rate Relative reduction of area (RRA) |
ISSN号 | 0360-3199 |
DOI | 10.1016/j.ijhydene.2019.07.131 |
通讯作者 | Xing Weiwei(wwxing@imr.ac.cn) ; Liu Kui(kliu@imr.ac.cn) |
英文摘要 | The tensile properties and crack propagation rate in a type 316 austenitic stainless steel prepared by vacuum induction melting method with different residual hydrogen contents (1.1-11.5 x 10(-6)) were systematically investigated in this research work. The room temperature tensile properties were measured under both regular tensile (12 mm/min) and slow tensile (0.01 mm/min) conditions, and the fracture properties of the tensile fractures with both rates were analyzed. It shows that the hydrogen induced plasticity loss of stainless steel strongly depends on the tensile rate. Under regular tensile condition, there is no plastic loss even when the hydrogen content is up to 11.5 x 10(-6) while in the slow tensile condition, the plastic loss can be clearly identified rising with the increasing H contents. The fatigue crack propagation rate was tested at room temperature, and the crack growth rate formula (Paris) of the 316 stainless steels with varied H contents were obtained. The fatigue crack propagation rate test shows that the crack growth rate of the 316 stainless steel with 8.0-11.5 x 10(-6) hydrogen is significantly higher than that of benchmark steel. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved. |
资助项目 | National Natural Science Foundation of China[51801210] |
WOS研究方向 | Chemistry ; Electrochemistry ; Energy & Fuels |
语种 | 英语 |
出版者 | PERGAMON-ELSEVIER SCIENCE LTD |
WOS记录号 | WOS:000488887400066 |
资助机构 | National Natural Science Foundation of China |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/135774] |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Xing Weiwei; Liu Kui |
作者单位 | 1.IMR NMSA, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang 110014, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
推荐引用方式 GB/T 7714 | Li Xiaobing,Gao Ming,Li Haoze,et al. Effect of residual hydrogen content on the tensile properties and crack propagation behavior of a type 316 stainless steel[J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,2019,44(45):25054-25063. |
APA | Li Xiaobing.,Gao Ming.,Li Haoze.,Xing Weiwei.,Zhang Long.,...&Liu Kui.(2019).Effect of residual hydrogen content on the tensile properties and crack propagation behavior of a type 316 stainless steel.INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,44(45),25054-25063. |
MLA | Li Xiaobing,et al."Effect of residual hydrogen content on the tensile properties and crack propagation behavior of a type 316 stainless steel".INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 44.45(2019):25054-25063. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论