Effect of processing parameters on solidification defects behavior of laser deposited AlSi10Mg alloy | |
Gao, Yuan1,2,3; Zhao, Jibin1,3; Zhao, Yuhui1,3; Wang, Zhiguo1,3; Song, Hongwu4; Gao, Mengqiu1,3 | |
刊名 | VACUUM |
2019-09-01 | |
卷号 | 167页码:471-478 |
关键词 | Laser deposition AlSi10Mg alloy Processing parameter Pore defect |
ISSN号 | 0042-207X |
DOI | 10.1016/j.vacuum.2019.06.042 |
通讯作者 | Zhao, Yuhui(yhzhao@sia.cn) |
英文摘要 | In order to investigate the influences of different processing parameters to the defects feature and microstructure of the Laser Direct Metal Deposited AlSi10Mg alloy parts, AlSi10Mg alloy depositing experiments were carried out using various scanning speed, carrier gas flow rate and laser incidence directions. The effects of the above parameters to the inner defects feature and microstructure of the deposited layers were obtained through analyzing the metallographic samples. And the causes of the pore defects inside the samples were analyzed and speculated. To verified the conclusions, tensile tests were implemented. It is discovered that increasing the scanning speed properly during depositing can reduce the pores generated by both hydrogen and trapped external gases, and have positive impact to the microstructure and microhardness of the samples. In addition, increasing the carrier gas flow rate will dramatically worsen the defects feature, and deflecting the laser incidence direction to obtuse angle to the laser scanning direction can lessen the number and the size of pore defects. |
资助项目 | National Key Research and Development Program of China[2018YFB1105802] ; National Key Research and Development Program of China[2017YFB110400] ; National Key Research and Development Program of China[2016YFB1102002] ; National Natural Science Foundation of China[51805526] |
WOS研究方向 | Materials Science ; Physics |
语种 | 英语 |
出版者 | PERGAMON-ELSEVIER SCIENCE LTD |
WOS记录号 | WOS:000482245800067 |
资助机构 | National Key Research and Development Program of China ; National Natural Science Foundation of China |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/134979] |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Zhao, Yuhui |
作者单位 | 1.Chinese Acad Sci, Inst Robot & Intelligent Mfg Innovat, Shenyang 110016, Liaoning, Peoples R China 2.Northeastern Univ, Sch Mech Engn & Automat, Shenyang 110004, Liaoning, Peoples R China 3.Chinese Acad Sci, Shenyang Inst Automat, Shenyang 110016, Liaoning, Peoples R China 4.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
推荐引用方式 GB/T 7714 | Gao, Yuan,Zhao, Jibin,Zhao, Yuhui,et al. Effect of processing parameters on solidification defects behavior of laser deposited AlSi10Mg alloy[J]. VACUUM,2019,167:471-478. |
APA | Gao, Yuan,Zhao, Jibin,Zhao, Yuhui,Wang, Zhiguo,Song, Hongwu,&Gao, Mengqiu.(2019).Effect of processing parameters on solidification defects behavior of laser deposited AlSi10Mg alloy.VACUUM,167,471-478. |
MLA | Gao, Yuan,et al."Effect of processing parameters on solidification defects behavior of laser deposited AlSi10Mg alloy".VACUUM 167(2019):471-478. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论