Incremental forming characteristics of hollow parts with grooves

doi:10.1007/s00170-018-3201-5

CORC > 金属研究所 > 中国科学院金属研究所

	Incremental forming characteristics of hollow parts with grooves
	Guo, Xunzhong 2,3; Wang, Cheng 2,3; Xu, Yong 1,4; Abd El-Aty, Ali 1; Zhang, Shi-Hong 1
刊名	INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
	2019-05-01
卷号	102 期号:1-4 页码:829-837
关键词	Incremental forming Tubular parts Grooves Simulation
ISSN号	0268-3768
DOI	10.1007/s00170-018-3201-5
通讯作者	Xu, Yong(yxu@imr.ac.cn)
英文摘要	Incremental profile forming (IPF) is a new plastic processing technology developed in recent years. The new profile manufacturing technology is mainly used to produce tubular parts with variable cross sections along the axis of tube. The parts with different cross sections produced by this technology satisfy the lightweight and high strength requirements of the tubular parts. The IPF method is very flexible and can form diverse complex-shaped parts. Because no special machine is available for this technology, depending on the shapes of formed tubular parts, the forming tool and forming method should be designed. Thus, this study proposes a new method to form the annular groove and tube wall groove. Using a special tool and servo drive system of spinning machine, it is possible to form an annular groove and tube wall groove on the surface of tubular part. This is a typical IPF method for tubes. The process of different grooves on the surface of tubes was systematically studied in this paper. Through experiments and finite element simulations, different process parameters influencing the forming quality of groove were studied. It was concluded that the tool's single feed and spindle speed significantly affect the forming quality and forming limit.
资助项目	Fundamental Research Funds for the Central Universities[NS2016059]
WOS研究方向	Automation & Control Systems ; Engineering
语种	英语
出版者	SPRINGER LONDON LTD
WOS记录号	WOS:000463670200065
资助机构	Fundamental Research Funds for the Central Universities
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/132717]
专题	金属研究所_中国科学院金属研究所
通讯作者	Xu, Yong
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 211100, Jiangsu, Peoples R China 3.Nanjing Univ Aeronaut & Astronaut, Jiangsu Key Lab Nucl Energy Equipment Mat Engn, Nanjing 211100, Jiangsu, Peoples R China 4.Nanjing Univ Sci & Technol, Sch Mat Sci & Engn, Nano & Heterogeneous Mat Ctr, Nanjing 210094, Jiangsu, Peoples R China
推荐引用方式 GB/T 7714	Guo, Xunzhong,Wang, Cheng,Xu, Yong,et al. Incremental forming characteristics of hollow parts with grooves[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,102(1-4):829-837.
APA	Guo, Xunzhong,Wang, Cheng,Xu, Yong,Abd El-Aty, Ali,&Zhang, Shi-Hong.(2019).Incremental forming characteristics of hollow parts with grooves.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,102(1-4),829-837.
MLA	Guo, Xunzhong,et al."Incremental forming characteristics of hollow parts with grooves".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 102.1-4(2019):829-837.