Proton Irradiation Effects on Hardness and the Volta Potential of Welding 308L Duplex Stainless Steel | |
Jiang, Baolong2; Peng, Qunjia3; Jiao, Zhijie4; Volinsky, Alex A.1,2; Qiao, Lijie2 | |
刊名 | MICROMACHINES |
2019 | |
卷号 | 10期号:1页码:13 |
关键词 | 308L proton irradiation duplex microstructure Volta potential micro-hardness |
ISSN号 | 2072-666X |
DOI | 10.3390/mi10010011 |
通讯作者 | Qiao, Lijie(lqiao@ustb.edu.cn) |
英文摘要 | 308L welding duplex stainless steel has been irradiated at 360 degrees C with 2 MeV protons, corresponding to a dose of 3 dpa at the maximum depth of 20 m. Microhardness of the -ferrite and austenite phases was studied before and after proton irradiation using in situ nanomechanical test system (ISNTS). The locations of the phases for indentations placement were obtained by scanning probe microscopy from the ISNTS. The hardness of the -ferrite had a close relationship with the vacancy distribution obtained from the Stopping and Range of Ions in Matter (SRIM) Monte Carlo simulation code. However, the hardness of the austenite phase in the maximum damage region (17-20 m depth) from the SRIM simulation was decreasing sharply, and a hardness transition region (>20 m and <55 m depth) was found between the maximum damage region (17-20 m depth) and the unirradiated region (>20 m depth). However, the -ferrite hardness behavior was different. A hardness of the two phases increased on the irradiated surface and the interior due to different hardening mechanisms in the austenite and -ferrite phases after a long time high-temperature irradiation. A transition region (>20 m and <55 m depth) of the Volta potential was also found, which was caused by the deeper transfer of implanted protons measured by scanning Kelvin probe force microscopy. |
资助项目 | National Natural Science Foundation of China[51771031] ; National Natural Science Foundation of China[11291146] ; National Natural Science Foundation of China[51431004] |
WOS研究方向 | Science & Technology - Other Topics ; Instruments & Instrumentation |
语种 | 英语 |
出版者 | MDPI |
WOS记录号 | WOS:000459735300011 |
资助机构 | National Natural Science Foundation of China |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/132178] |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Qiao, Lijie |
作者单位 | 1.Univ S Florida, Dept Mech Engn, Tampa, FL 33620 USA 2.Univ Sci & Technol Beijing, Key Lab Environm Fracture MOE, Beijing Adv Innovat Ctr Mat Genet Engn, Beijing 100083, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Liaoning, Peoples R China 4.Univ Michigan, Nucl Engn & Radiol Sci, 2355 Bonisteel Blvd, Ann Arbor, MI 48109 USA |
推荐引用方式 GB/T 7714 | Jiang, Baolong,Peng, Qunjia,Jiao, Zhijie,et al. Proton Irradiation Effects on Hardness and the Volta Potential of Welding 308L Duplex Stainless Steel[J]. MICROMACHINES,2019,10(1):13. |
APA | Jiang, Baolong,Peng, Qunjia,Jiao, Zhijie,Volinsky, Alex A.,&Qiao, Lijie.(2019).Proton Irradiation Effects on Hardness and the Volta Potential of Welding 308L Duplex Stainless Steel.MICROMACHINES,10(1),13. |
MLA | Jiang, Baolong,et al."Proton Irradiation Effects on Hardness and the Volta Potential of Welding 308L Duplex Stainless Steel".MICROMACHINES 10.1(2019):13. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论