Prediction and evaluation of optimum quenching temperature and microstructure in a 1300 MPa ultra-high-strength Q&P steel | |
Gao, Peng-fei1,2; Liang, Ju-hua1,2,3; Chen, Wei-jian1,2; Li, Feng1,2; Zhao, Zheng-zhi1,2 | |
刊名 | JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL |
2021-02-11 | |
关键词 | Quenching and partitioning Constrained carbon equilibrium Retained austenite Martensite start temperature Plasticity Quenching temperature |
ISSN号 | 1006-706X |
DOI | 10.1007/s42243-020-00535-5 |
通讯作者 | Zhao, Zheng-zhi(zhaozhzhi@ustb.edu.cn) |
英文摘要 | The quenching and partitioning steel is the representative of the third generation of advanced high-strength steel. The effect of quenching temperature on the microstructure and mechanical property of ferrite-containing quenching and partitioning steel was studied by intercritical annealing quenching and partitioning processes. When preparing a test steel with a tensile strength of 1300 MPa and total elongation of 19%, it is found that the actual optimum quenching temperature was lower than that calculated according to the constrained carbon equilibrium. The results indicate that the martensite start temperature of the austenite was overestimated when considering the diffusion of carbon only. Austenite grain size which is affected by low temperature and the existence of ferrite during intercritical annealing influenced the optimum quenching temperature. A scheme considering the diffusion of various alloying elements and austenite grain size was proposed and verified. Using this scheme, the optimum quenching temperature of intercritically annealed quenching and partitioning steel with complex microstructures was well predicted. |
资助项目 | National Key Research and Development Program of Thirteenth Five-Year Plan Period[2017YFB0304400] ; Production and Application Demonstration Platform of New Energy Automotive Material[TC180A6MR-1] |
WOS关键词 | TRANSFORMATION-INDUCED PLASTICITY ; MECHANICAL-PROPERTIES ; RETAINED AUSTENITE ; MEDIUM-CARBON ; DESIGN ; BEHAVIOR |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | SPRINGER |
WOS记录号 | WOS:000617096100004 |
资助机构 | National Key Research and Development Program of Thirteenth Five-Year Plan Period ; Production and Application Demonstration Platform of New Energy Automotive Material |
内容类型 | 期刊论文 |
源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/120604] |
专题 | 中国科学院合肥物质科学研究院 |
通讯作者 | Zhao, Zheng-zhi |
作者单位 | 1.Univ Sci & Technol Beijing, Collaborat Innovat Ctr Steel Technol, Beijing 100083, Peoples R China 2.Beijing Lab Metall Mat & Proc Modern Transportat, Beijing 100083, Peoples R China 3.Chinese Acad Sci, Inst Solid State Phys, Key Lab Mat Phys, Hefei 230031, Anhui, Peoples R China |
推荐引用方式 GB/T 7714 | Gao, Peng-fei,Liang, Ju-hua,Chen, Wei-jian,et al. Prediction and evaluation of optimum quenching temperature and microstructure in a 1300 MPa ultra-high-strength Q&P steel[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,2021. |
APA | Gao, Peng-fei,Liang, Ju-hua,Chen, Wei-jian,Li, Feng,&Zhao, Zheng-zhi.(2021).Prediction and evaluation of optimum quenching temperature and microstructure in a 1300 MPa ultra-high-strength Q&P steel.JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL. |
MLA | Gao, Peng-fei,et al."Prediction and evaluation of optimum quenching temperature and microstructure in a 1300 MPa ultra-high-strength Q&P steel".JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2021). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论