Solids velocity measurement using electric capacitance sensor assemblies | |
Abrar U; Shi L; Jaffri N.R; Li Q; Sindhu H.R; Omar M.W. | |
2020 | |
会议日期 | 26 April 2019 through 28 April 2019 |
英文摘要 | This paper covers the application of the cross-correlation method for measuring the velocity of solid particles. Capacitive electrodes are used as primary sensors to measure the time required by the solid particles to cover a known distance between the electrodes. The capacitive variations of both the electrode sensors are stored in computer synchronously for offline estimation of the velocity of the solid particles. Single glass marble is used as a solid particle to conduct the performance in the lab for its good signal to noise ratio (SNR) and vivid graphs. Matlab R2018a is used as a programming tool to perform the cross-correlation algorithm. The distance between the sensors is adjusted optimally. The results were realistic to ensure the correctness of the system. © 2020 Published under licence by IOP Publishing Ltd. |
会议录 | IOP Conference Series: Materials Science and Engineering |
资助机构 | The authors wish to extend their gratitude to NSFC for sponsoring the research (No 61571189, 61871181) and to the State Administration of Foreign Experts Affairs for supporting the 111 project (ref: B13009). |
语种 | 英语 |
URL标识 | 查看原文 |
内容类型 | 会议论文 |
源URL | [http://dspace.imech.ac.cn/handle/311007/86652] |
专题 | 力学研究所_流固耦合系统力学重点实验室(2012-) |
推荐引用方式 GB/T 7714 | Abrar U,Shi L,Jaffri N.R,et al. Solids velocity measurement using electric capacitance sensor assemblies[C]. 见:. 26 April 2019 through 28 April 2019. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论