CORC  > 北京大学  > 工学院
In vitro study on equal channel angular pressing AZ31 magnesium alloy with and without back pressure
Gu, X.N. ; Li, N. ; Zheng, Y.F. ; Kang, F. ; Wang, J.T. ; Ruan, Liquan
2011
DOI10.1016/j.mseb.2011.04.003
英文摘要The equal channel angular pressing (ECAP) technique with and without back pressure (BP) was introduced in this paper to prepare biomedical AZ31 magnesium alloy, with the effect of pass number (from 1 to 4) on the corrosion properties as well as in vitro biocompatibility being investigated. The results indicated that ECAPed or BP-ECAPed AZ31 alloys exhibited similar corrosion rate to that of the as-extruded one, but the corrosion rate slightly increased after 1-2 passes ECAP or BP-ECAP and further decreased after 4-pass procedure. Additionally, severe local corrosion was observed for the 1-3 passes ECAPed or BP-ECAPed AZ31 alloy samples. Compared to the as-extruded AZ31 alloy, the samples after ECAP or BP-ECAP procedure showed much smaller sized corrosion pits on the surface after removing the corrosion product. The surface analysis after 20 days immersion in Hank's solution revealed that the composition of the corrosion product consisted of C, O, Mg, P, Ca whereas only weak signal of Mg(OH)2 could be detected beside the dominant ??(Mg) peak by X-ray diffraction. The cytotoxicity results suggested that the multi-pass ECAPed or BP-ECAPed AZ31 alloy exhibited Grade I-II cytotoxicity according to ISO 10993-5: 1999. ? 2011 Elsevier B.V. All rights reserved.; EI; 20; 1802-1806; 176
语种英语
内容类型会议论文
源URL[http://ir.pku.edu.cn/handle/20.500.11897/461511]  
专题工学院
推荐引用方式
GB/T 7714
Gu, X.N.,Li, N.,Zheng, Y.F.,et al. In vitro study on equal channel angular pressing AZ31 magnesium alloy with and without back pressure[C]. 见:.
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace