QQ客服 官方微博 反馈留言

	The effects of trailing edge thickness on the losses of ultra-high lift LP turbine blades
	Zhou, Chao ; Hodson, Howard ; Himmel, Christoph
	2013
DOI	10.1115/GT2013-94029
英文摘要	Experimental, numerical and analytical methods were used to investigate the effects of the blade trailing edge thickness on the profile loss of ultra-high lift low pressure turbine blades. Two cascades, the T106C and the T2, were studied. The loss obtained based on the data at the blade trailing edge plane and the plane 0.3 Chord downstream of the trailing edge agree with each other for T106C blade with and without upstream wakes at different Reynolds numbers. The blade profile losses were broken down as the suction surface boundary loss, the pressure side boundary loss and the mixing loss downstream of the trailing edge for six Reynolds numbers. Trailing edge thicknesses varying from 1.4% to 4.7% Pitch were investigated at a Reynolds number of 210000. It was found that the flow distributions across the passage at the trailing edge planes were highly non-uniform. In particular, and as a result, the trailing edge base pressure was higher than the mixed-out static pressure, so the contribution of the base pressure to the mixing loss downstream of the trailing edge plane was to reduce the loss. When the trailing edge thickness increases, there are three main effects: 1) The area with high base pressure region increase, which tends to reduce the downstream mixing loss; 2) The base pressure reduces, which tends to increase the loss; 3) The flow diffusion downstream of the trailing edge, which tends to increase the loss. The overall result is the combined effect. For the T106C cascade, increasing the trailing edge thickness from 1.9% Pitch to 2.8% Pitch has a small effect on the loss. Further increasing the trailing edge thickness increases the loss. The T2 blade has a higher lift than the T106C blade, so the effects of the base pressure in reducing the mixing loss downstream of the trailing edge is more evident. The experimental results show that the profile loss first decreases and then increases as the trailing edge thickness increases. CFD, using the transition k-?? SST model and the k-?? SST model, provides good predictions of the aerodynamic performance. It was used to study the cases with trailing edge thicknesses of 1.4% Pitch and 2.9% Pitch. The profile loss is almost the same for these two trailing edge thickness. The results show that it is possible to use thicker blade trailing edges in low pressure turbines without aerodynamic penalty. This can lead to benefits in terms of mechanical integrity and manufacturing cost reductions. Copyright ? 2013 by ASME.; EI; 0
语种	英语
内容类型	会议论文
源URL	[http://ir.pku.edu.cn/handle/20.500.11897/316717]
专题	工学院
推荐引用方式 GB/T 7714	Zhou, Chao,Hodson, Howard,Himmel, Christoph. The effects of trailing edge thickness on the losses of ultra-high lift LP turbine blades[C]. 见:.

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。