Study the Formation Process of Cuboid Microprotrusion by Glass Molding   Process

doi:10.3390/mi8030066

CORC > 北京大学 > 信息科学技术学院

	Study the Formation Process of Cuboid Microprotrusion by Glass Molding Process
	Wang, Tao ; Zhou, Tianfeng ; Chen, Jing ; Song, Lu
刊名	MICROMACHINES
	2017
关键词	glass molding process finite element modelling microprotrusion BLOOD-CELL-SEPARATION FABRICATION LENS BEHAVIOR PRESS
DOI	10.3390/mi8030066
英文摘要	This paper investigates the formation process of a typical microstructure in the glass microfluidic chip, i.e., cuboid microprotrusion, by the soda-lime glass molding process (GMP). The finite element models on the platform Abaqus/Standard were established for simulating the glass molding process. The glass viscoelasticity at pressing temperature was described by the General Maxwell model. The influence of the temperature, aspect ratio and side wall angle on the replication ratio was investigated, and the corresponding predicted molded profiles were demonstrated as well. The established simulation model was verified by experimental results eventually. It could provide a fundamental experience for optimizing glass molding parameters to fabricate microstructures on glass chips.; National Natural Science Foundation of China [U1537208]; National High Technology Research and Development Program of China (863) [2015AA043601]; SCI(E); ARTICLE; 3; 8
语种	英语
内容类型	期刊论文
源URL	[http://ir.pku.edu.cn/handle/20.500.11897/474746]
专题	信息科学技术学院
推荐引用方式 GB/T 7714	Wang, Tao,Zhou, Tianfeng,Chen, Jing,et al. Study the Formation Process of Cuboid Microprotrusion by Glass Molding Process[J]. MICROMACHINES,2017.
APA	Wang, Tao,Zhou, Tianfeng,Chen, Jing,&Song, Lu.(2017).Study the Formation Process of Cuboid Microprotrusion by Glass Molding Process.MICROMACHINES.
MLA	Wang, Tao,et al."Study the Formation Process of Cuboid Microprotrusion by Glass Molding Process".MICROMACHINES (2017).