QQ客服 官方微博 反馈留言

	Study of Polyimide as Sacrificial Layer with O(2) Plasma Releasing for Its Application in MEMS Capacitive FPA Fabrication
	Ma, Shenglin ; Li, Ying ; Sun, Xin ; Yu, Xiaomei ; Jin, Yufeng
	2009
关键词	PRESSURE SENSOR
英文摘要	Polyimide (PI) was a good candidate as the sacrificial layer for its compatibility with CMOS technology. This paper first presented a new patterning method of PI film and then investigated the relationships among undercut rate, the undercut limit length and the releasing hole size in the releasing step, which was helpful and important for its popularity and its application in MEMS capacitive FPA (Focal plane array) fabrication. A new patterning approach of PI film was successfully developed in ICP chamber. The patterning approach selected a PECVD SiO(2) layer as patterning mask. The optimized ICP PI recipe was composed of an O(2) flow of 180sccm, an electrode power of 400W and bias plate power 200W. With the optimized ICP PI recipe, a vertical etching rate about 0.5-0.6 mu m/min with a lateral etching rate 0.13 mu m/min was realized. With 1 mu m PI sacrificial layer, a 0.22 mu m/min undercut rate was achieved in a normal barrel etcher. Based on our experimental facts, the optimized releasing hole size was 5 mu mx5 mu m and the distance between lateral releasing holes should be fewer than 17 mu m for effectively and completely releasing.; Engineering, Electrical & Electronic; CPCI-S(ISTP); 0
语种	英语
内容类型	其他
源URL	[http://ir.pku.edu.cn/handle/20.500.11897/406347]
专题	信息科学技术学院
推荐引用方式 GB/T 7714	Ma, Shenglin,Li, Ying,Sun, Xin,et al. Study of Polyimide as Sacrificial Layer with O(2) Plasma Releasing for Its Application in MEMS Capacitive FPA Fabrication. 2009-01-01.

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。