Texture and yielding anisotropy of Zircaloy-4 alloy cladding tube produced by cold Pilger rolling and annealing | |
Liu, CZ; Li, GP; Chu, LH; Gu, HF; Yuan, FS; Han, FZ; Zhang, YD; Li, GP (reprint author), Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China. | |
刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
2018-03-14 | |
卷号 | 719页码:147-154 |
关键词 | Strain-rate Mechanical-properties Schmid Factors Zirconium Zr Deformation Behavior Slip Microstructure Temperature |
ISSN号 | 0921-5093 |
英文摘要 | Crystal orientation and mechanical properties of Zircaloy-4 (Zr-4) alloy cladding tube manufactured by cold Pilger rolling and annealing were systematically investigated. Electron Back-Scattered Diffraction (EBSD) analysis showed that grains, which were fully recrystallized in alpha phase, were strongly oriented with their c axis parallel to the tangential direction (TD) of the tube and, meanwhile, their normal direction of {11 (2) over bar0(}alpha) planes parallel to the axial direction (AD). Compression tests carried out along three loading directions (TD-0 degrees, TD-45 degrees and AD, respectively) at room temperature revealed that the Zr-4 alloy tube exhibit strong yielding anisotropy: TD-0 degrees > TD-45 degrees > AD. Meanwhile, the alloy exhibited strain rate hardening effect, since the yield strength increased with the growing strain rate. The relationship between texture and yielding anisotropy of the Zr-4 alloy tube was further discussed based on Schmid factor theory. The Schmid factor values for basal, prismatic and pyramidal < a > slip systems, which were three important yielding mechanisms in Zr-4 alloy during the compression, were calculated depending on the geometric relationship between loading directions and crystal-lography. Calculation results revealed that there was an inverse relationship between Schmid factor value for slip modes and the compression yield strength of the Zr-4 alloy.; Crystal orientation and mechanical properties of Zircaloy-4 (Zr-4) alloy cladding tube manufactured by cold Pilger rolling and annealing were systematically investigated. Electron Back-Scattered Diffraction (EBSD) analysis showed that grains, which were fully recrystallized in alpha phase, were strongly oriented with their c axis parallel to the tangential direction (TD) of the tube and, meanwhile, their normal direction of {11 (2) over bar0(}alpha) planes parallel to the axial direction (AD). Compression tests carried out along three loading directions (TD-0 degrees, TD-45 degrees and AD, respectively) at room temperature revealed that the Zr-4 alloy tube exhibit strong yielding anisotropy: TD-0 degrees > TD-45 degrees > AD. Meanwhile, the alloy exhibited strain rate hardening effect, since the yield strength increased with the growing strain rate. The relationship between texture and yielding anisotropy of the Zr-4 alloy tube was further discussed based on Schmid factor theory. The Schmid factor values for basal, prismatic and pyramidal < a > slip systems, which were three important yielding mechanisms in Zr-4 alloy during the compression, were calculated depending on the geometric relationship between loading directions and crystal-lography. Calculation results revealed that there was an inverse relationship between Schmid factor value for slip modes and the compression yield strength of the Zr-4 alloy. |
学科主题 | Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
语种 | 英语 |
公开日期 | 2018-06-05 |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/79433] |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Li, GP (reprint author), Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China. |
推荐引用方式 GB/T 7714 | Liu, CZ,Li, GP,Chu, LH,et al. Texture and yielding anisotropy of Zircaloy-4 alloy cladding tube produced by cold Pilger rolling and annealing[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2018,719:147-154. |
APA | Liu, CZ.,Li, GP.,Chu, LH.,Gu, HF.,Yuan, FS.,...&Li, GP .(2018).Texture and yielding anisotropy of Zircaloy-4 alloy cladding tube produced by cold Pilger rolling and annealing.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,719,147-154. |
MLA | Liu, CZ,et al."Texture and yielding anisotropy of Zircaloy-4 alloy cladding tube produced by cold Pilger rolling and annealing".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 719(2018):147-154. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论