Fabrication and characterization of anode catalyst layers with structural variations for DMFC
Ren,Tongqun3,4; Wang,Dazhi3,4; Shi,Peng3; Sun,Gongquan1; Zhou,Peng3; Mao,Qing5; Liang,Junsheng3,4; Wang,Suli1; Li,Yang2
刊名Materials Research Express
2018-04-27
卷号5期号:4
关键词direct methanol fuel cell catalyst layer electrohydrodynamic jet layer-by-layer deposition
ISSN号2053-1591
DOI10.1088/2053-1591/aabdc5
英文摘要Abstract In this work, the electrohydrodynamic jet (E-Jet) Layer-by-Layer (LbL) deposition technique was employed to produce anode catalyst layer (CL) structure for direct methanol fuel cells (DMFC). The CLs with different thickness and porosity were fabricated with the control of the E-Jet deposition parameters. Then, the deposited anode CLs with structural variations were assembled to membrane electrode assemblies (MEAs). The results showed that the anode CL with higher porosity contributed higher dispersed catalyst, which further induced greater electrochemical active surface area (ESA) and higher performance. At optimized working condition the anode CL with high-dispersed catalyst of was produced using the E-Jet LbL deposition technique. It was observed that the peak power density is 72.8 mW cm?2 for the cell having a porosity of 0.63, which has an increase of about 33% after modification of the CL structure.
语种英语
出版者IOP Publishing
WOS记录号IOP:2053-1591-5-4-AABDC5
内容类型期刊论文
源URL[http://cas-ir.dicp.ac.cn/handle/321008/167066]  
专题大连化学物理研究所_中国科学院大连化学物理研究所
作者单位1.Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, People’s Republic of China
2.NR Electric Power Electronics Co., Ltd, Changzhou, 213025, People’s Republic of China
3.Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, 116024, People’s Republic of China
4.Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, 116024, People’s Republic of China
5.Department of Electrochemical Engineering, Dalian University of Technology, Dalian, 116024, People’s Republic of China
推荐引用方式
GB/T 7714
Ren,Tongqun,Wang,Dazhi,Shi,Peng,et al. Fabrication and characterization of anode catalyst layers with structural variations for DMFC[J]. Materials Research Express,2018,5(4).
APA Ren,Tongqun.,Wang,Dazhi.,Shi,Peng.,Sun,Gongquan.,Zhou,Peng.,...&Li,Yang.(2018).Fabrication and characterization of anode catalyst layers with structural variations for DMFC.Materials Research Express,5(4).
MLA Ren,Tongqun,et al."Fabrication and characterization of anode catalyst layers with structural variations for DMFC".Materials Research Express 5.4(2018).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace