QQ客服 官方微博 反馈留言

	Study on the friction and wear properties of carbon fabric composites reinforced with micro- and nano-particles
	Zhang, ZZ; Su, FH; Wang, K; Jiang, W; Men, XH; Liu, WM
刊名	Materials science and engineering a-structural materials properties microstructure and processing
	2005-09-15
卷号	404期号:1-2页码:251-258
关键词	Carbon fabric composite Pfw Nano-particles Filler Friction and wear behavior
ISSN号	0921-5093
DOI	10.1016/j.msea.2005.05.084
通讯作者	Zhang, zz(zzzhang@ns.lzb.ac.cn)
英文摘要	The carbon fabric composites filled with the particulates of polyfluo-150 wax (pfw), nano-particles of zno (nano-zno), and nanoparticles of sic (nano-sic), respectively, were prepared by dip-coating of the carbon fabric in a phenolic resin containing the particulates to be incorporated and the successive curing. the friction and wear behaviors of the carbon fabric composites sliding against aisi-1045 steel in a pin-on-disk configuration are evaluated on a xuanwu-iii high-temperature friction and wear tester. the morphologies of the worn surfaces of the filled carbon fabric composites and the counterpart steel pins are analyzed by means of scanning electron microscopy. the effect of the fillers on the adhesion strength of the adhesive is evaluated using a dy35 universal materials tester. it is found that the fillers pfw, nano-zno, and nano-sic contribute to significantly increasing anti-wear abilities of the carbon fabric composites, however, nano-sic increase the friction coefficient of the carbon fabric composites. the wear rates of the composites at elevated temperature above 180 degrees c are much larger than that below 180 degrees c, which attribute to the degradation and decomposition of the adhesive resin at an excessively elevated temperature. that the interface bonding strength among the carbon fabric, the adhesive, and the particles is significantly increased after solidification and with the transferred film of the varied features largely account for the increased wear-resistance of the filled carbon fabric composites as compared with the unfilled one. (c) 2005 elsevier b.v. all rights reserved.
WOS关键词	TRIBOLOGICAL BEHAVIOR
WOS研究方向	Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
语种	英语
出版者	ELSEVIER SCIENCE SA
WOS记录号	WOS:000232252800033
内容类型	期刊论文
URI标识	http://www.corc.org.cn/handle/1471x/2377821
专题	中国科学院大学
通讯作者	Zhang, ZZ
作者单位	1.Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China 2.Chinese Acad Sci, Grad Sch, Beijing 100039, Peoples R China
推荐引用方式 GB/T 7714	Zhang, ZZ,Su, FH,Wang, K,et al. Study on the friction and wear properties of carbon fabric composites reinforced with micro- and nano-particles[J]. Materials science and engineering a-structural materials properties microstructure and processing,2005,404(1-2):251-258.
APA	Zhang, ZZ,Su, FH,Wang, K,Jiang, W,Men, XH,&Liu, WM.(2005).Study on the friction and wear properties of carbon fabric composites reinforced with micro- and nano-particles.Materials science and engineering a-structural materials properties microstructure and processing,404(1-2),251-258.
MLA	Zhang, ZZ,et al."Study on the friction and wear properties of carbon fabric composites reinforced with micro- and nano-particles".Materials science and engineering a-structural materials properties microstructure and processing 404.1-2(2005):251-258.

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。