Polycrystalline Ho: LuAG laser ceramics: Fabrication, microstructure, and optical characterization | |
Li, Chaoyu1,2; Xie, Tengfei1; Ye, Zhang3; Yao, Baoquan3; Kou, Huamin1; Pan, Yubai4; Li, Jiang1 | |
刊名 | Journal of the American Ceramic Society |
2017 | |
卷号 | 100期号:5页码:2081-2087 |
ISSN号 | 00027820 |
DOI | 10.1111/jace.14771 |
英文摘要 | Ho:Lu3Al5O12(LuAG) transparent ceramics are potential 2 μm eye-safe laser materials. Polycrystalline 0.8 at.% Ho:LuAG ceramics with high optical quality were successfully fabricated by solid-state reactive sintering of high-purity oxide powders. The microstructure, the optical transmission, the spectrum characteristic, and the laser performance were investigated in this paper. The average grain size of Ho:LuAG ceramics vacuum sintered at 1830°C for 30 hour is about 14 μm. The in-line transmittance of the sample is measured to be 81.7% and 82.0% at 1000 and 2250 nm, respectively. The absorption and the emission cross sections are calculated to be 0.88 × 10−20 cm2at 1906 nm and 1.26 × 10−20 cm2at 2094 nm. Using a thulium-doped yttrium-lithium-fluoride (Tm:YLF) laser with the central wavelength of 1907.5 nm as the pump source, 2.67 W continuous wave (CW) laser operation at 2100.74 nm was obtained with a slope efficiency of 26.5%. The beam quality factor M2was calculated to be 1.1, which indicated nearly diffraction-limited beam propagation and the laser was the fundamental TEM00Gaussian mode. © 2017 The American Ceramic Society |
内容类型 | 期刊论文 |
源URL | [http://ir.sic.ac.cn/handle/331005/25852] |
专题 | 中国科学院上海硅酸盐研究所 |
作者单位 | 1.Key Laboratory of Transparent and Opto-Functional Inorganic Materials, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, China; 2.University of Chinese Academy of Sciences, Beijing, China; 3.National Key Laboratory of Tunable Laser Technology, Harbin Institute of Technology, Harbin, China; 4.Department of Physics, Shanghai Normal University, Shanghai, China |
推荐引用方式 GB/T 7714 | Li, Chaoyu,Xie, Tengfei,Ye, Zhang,et al. Polycrystalline Ho: LuAG laser ceramics: Fabrication, microstructure, and optical characterization[J]. Journal of the American Ceramic Society,2017,100(5):2081-2087. |
APA | Li, Chaoyu.,Xie, Tengfei.,Ye, Zhang.,Yao, Baoquan.,Kou, Huamin.,...&Li, Jiang.(2017).Polycrystalline Ho: LuAG laser ceramics: Fabrication, microstructure, and optical characterization.Journal of the American Ceramic Society,100(5),2081-2087. |
MLA | Li, Chaoyu,et al."Polycrystalline Ho: LuAG laser ceramics: Fabrication, microstructure, and optical characterization".Journal of the American Ceramic Society 100.5(2017):2081-2087. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论