Preparation and characterization of monosized Cu-Sn spherical alloy particles by pulsated orifice ejection method | |
Hu, Ying-yan1,2; Yue, Wen1; Li, Jian-qiang2,3; Dong, Wei4; Li, Can2,5; Ma, Bing-qian2; Liu, Chao5; Han, Jian-jun5 | |
刊名 | JOURNAL OF MATERIALS RESEARCH |
2018-09-28 | |
卷号 | 33期号:18页码:2835-2843 |
关键词 | Monosized Cu-sn Particle Sphericity Pulsated Orifice Ejection Method Structural Cooling Rate Secondary Dendrite Arm Spacing |
ISSN号 | 0884-2914 |
DOI | 10.1557/jmr.2018.183 |
英文摘要 | Monosized spherical Cu-20% Sn (wt%) alloy particles with diameter ranging from 70.6 to 334.0 m were prepared by the pulsated orifice ejection method (termed POEM). Fully dense without pores and bulk inclusions, the cross-sectional micrographs of the spherical alloy particles indicate an even distribution of Cu and Sn. These spherical Cu-Sn alloy particles exhibit a good spherical shape and a narrow size distribution, suggesting that the liquid Cu-Sn alloy can completely break the balance between the surface tension and the liquid static pressure in the crucible micropores and accurately control the volume of the droplets. Furthermore, the cooling rate of spherical Cu-20% Sn alloy particles is estimated by a Newton's cooling model. The cooling rate of the Cu-20% Sn alloy particle decreases gradually with the particle diameter increasing. Smaller particles have higher cooling rates and when the particle diameter is less than 70 m, the cooling rate of particles can reach more than 3.3 x 10(4) K/s. The secondary dendrite arm spacing has strong dependence on particle diameter which increases gradually with the increase of particle diameter. The results demonstrate that POEM is an effective route for fabrication of high-quality monosized Cu-20% Sn alloy particles. |
资助项目 | Instrument Developing Project of the Chinese Academy of Sciences[YZ201520] ; National Natural Science Foundation of China[51501179] ; National Natural Science Foundation of China[51674232] ; National Natural Science Foundation of China[51671181] |
WOS关键词 | Low Wettability ; Powder ; Interface |
WOS研究方向 | Materials Science |
语种 | 英语 |
出版者 | CAMBRIDGE UNIV PRESS |
WOS记录号 | WOS:000446676400019 |
资助机构 | Instrument Developing Project of the Chinese Academy of Sciences ; National Natural Science Foundation of China |
内容类型 | 期刊论文 |
源URL | [http://ir.ipe.ac.cn/handle/122111/26344] |
专题 | 中国科学院过程工程研究所 |
通讯作者 | Hu, Ying-yan; Li, Jian-qiang |
作者单位 | 1.China Univ Geosci, Sch Engn & Technol, Beijing 100083, Peoples R China 2.Chinese Acad Sci, Inst Proc Engn, Natl Engn Lab Hydrometallurg Cleaner Prod Technol, Key Lab Green Proc & Engn, Beijing 100049, Peoples R China 3.Univ Chinese Acad Sci, Sch Chem & Chem Engn, Beijing 100049, Peoples R China 4.Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China 5.Wuhan Univ Technol, Sch Mat Sci & Engn, Wuhan 430070, Hubei, Peoples R China |
推荐引用方式 GB/T 7714 | Hu, Ying-yan,Yue, Wen,Li, Jian-qiang,et al. Preparation and characterization of monosized Cu-Sn spherical alloy particles by pulsated orifice ejection method[J]. JOURNAL OF MATERIALS RESEARCH,2018,33(18):2835-2843. |
APA | Hu, Ying-yan.,Yue, Wen.,Li, Jian-qiang.,Dong, Wei.,Li, Can.,...&Han, Jian-jun.(2018).Preparation and characterization of monosized Cu-Sn spherical alloy particles by pulsated orifice ejection method.JOURNAL OF MATERIALS RESEARCH,33(18),2835-2843. |
MLA | Hu, Ying-yan,et al."Preparation and characterization of monosized Cu-Sn spherical alloy particles by pulsated orifice ejection method".JOURNAL OF MATERIALS RESEARCH 33.18(2018):2835-2843. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论