Review of micro/nano machining by utilizing elliptical vibration cutting

CORC > 长春光学精密机械与物理研究所 > 中国科学院长春光学精密机械与物理研究所 > 中科院长春光机所知识产出

	Review of micro/nano machining by utilizing elliptical vibration cutting
	Zhang, J. G.; T. Cui; C. Ge; Y. X. Sui and H. J. Yang
刊名	International Journal of Machine Tools & Manufacture
	2016
卷号	106
英文摘要	A time-delayed integration charge-coupled device (TDI CCD) in an aerial panoramic camera compensates the sweep image motion correctly on the premise that the TDI charge shifting direction is coincident with that of the sweep image motion. The coordinate transformation method is used to find out how the included angle between the two directions originated. Then the precise alignment method of the TDI charge shifting direction is proposed to eliminate the included angle. TDI CCD is operated in area mode, nodding the scan mirror, the trajectory of the image point is derived to be a hyperbola, which could be equivalent to an obliquely straight line. The tilt angle of the line is exactly the included angle between the two directions. Meanwhile, the tilt angle can be calculated by the least square method. Then the scan head or the focal plane assembly is precisely rotated to eliminate the included angle between the two directions. The assembling error after precise alignment is calculated at - 16.4 s, which could hardly influence the MTF of TDI CCD. The panoramic imaging experiment and the flight test show that the precise alignment method is feasible and completely satisfies the operating requirement of the aerial panoramic camera. (C) 2016 Society of Photo-Optical Instrumentation Engineers (SPIE)
收录类别	SCI ; EI
语种	英语
内容类型	期刊论文
源URL	[http://ir.ciomp.ac.cn/handle/181722/57417]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Zhang, J. G.,T. Cui,C. Ge,et al. Review of micro/nano machining by utilizing elliptical vibration cutting[J]. International Journal of Machine Tools & Manufacture,2016,106.
APA	Zhang, J. G.,T. Cui,C. Ge,&Y. X. Sui and H. J. Yang.(2016).Review of micro/nano machining by utilizing elliptical vibration cutting.International Journal of Machine Tools & Manufacture,106.
MLA	Zhang, J. G.,et al."Review of micro/nano machining by utilizing elliptical vibration cutting".International Journal of Machine Tools & Manufacture 106(2016).