CORC  > 清华大学
二用一备变频系统组合式PLC控制器应用
姜信建 ; 姜上川 ; Jiang Xinjian ; Jiang Shangchuan
2016-03-30 ; 2016-03-30
关键词组合式 二用一备 变频器 PLC梯形图 控制器 TP273
其他题名The Application of Two-in-service and One-standby Combination Type of PLC Controller for Variable-frequency System
中文摘要本文介绍二用一备变频系统组合式PLC控制器。系统主回路用二个变频器控制三个受控电机;控制回路采用PLC控制器,通过PLC梯形图程序,实现由二个变频器VF1-VF2对三个受控电机M1-M3进行二用一备任意组合状态的切换控制。本控制系统适用于集中控制场合,具有控制精度高、最大限度减少设备硬件成本的特点。; This article introduced the two-in-service and one-standby combination type of PLC controller for variable-frequencysystem. The main circuit consists oftwofrequency converters to control three motors. Besides,the control circuit employs the PLC controller to implement switching control on any combination of the three controlled motors M1-M3 bytwofrequencyconverters VF1-VF2 as two-in-service and one-standbystate via the PLC ladder diagram program. This control system is applicable for centralized control occasions, with the advantagesofhighcontrolaccuracyandminimized costofhardwareequipment.
语种中文 ; 中文
内容类型期刊论文
源URL[http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/142290]  
专题清华大学
推荐引用方式
GB/T 7714
姜信建,姜上川,Jiang Xinjian,等. 二用一备变频系统组合式PLC控制器应用[J],2016, 2016.
APA 姜信建,姜上川,Jiang Xinjian,&Jiang Shangchuan.(2016).二用一备变频系统组合式PLC控制器应用..
MLA 姜信建,et al."二用一备变频系统组合式PLC控制器应用".(2016).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace