电沉积法制备Ni-Ti_3SiC_2复合镀层 | |
韩若冰 ; 石随林 ; 吴瑞芬 ; 潘伟 ; Han Ruobing ; Shi Suilin ; Wu Ruifen ; Pan Wei | |
2010-06-10 ; 2010-06-10 | |
关键词 | 复合镀层 Ti_3SiC_2 电沉积 表面改性 composite coating Ti_3SiC_2 electrodeposition surface modification TG174.4 |
其他题名 | Preparation of Ni-Ti_3SiC_2 Composite Coating by Electrodeposition |
中文摘要 | 以自制纯度超过98%(体积分数,下同)的Ti_3SiC_2陶瓷粉体为原料,加入分散剂和表面改性剂,制成稳定悬浮液,并加入Watts镀镍电镀液,利用磁力搅拌分散均匀,在阴极电流密度2A/dm~2~5A/dm~2下,在低碳钢基体表面成功得到Ni-Ti_3SiC_2减摩复合镀层。SEM观察表明,表面改性剂的加入有效地改变了粉体表面电导性质,得到致密平整的复合镀层结构。XRD及EDS分析表明:镀层中Ti_3SiC_2微粒含量为5%~14%(体积分数,下同)。当制备过程中以间歇式搅拌代替连续搅拌时,可得到Ti_3SiC_2相含量超过30%的复合镀层。复合镀层的显微硬度随微粒含量的升高而增大。; Ni-Ti_3SiC_2 composites coating was co-deposited on a steel substrate by DC electrodeposition.98 vol.% purity Ti_3SiC_2 ceramic powder pretreated with surfactant was added into a Watts' nickel plating bath,and stirred by magnetic stirring.Composite coating was fabricated at a cathode current density of 2 A/dm~2~5 A/dm~2.Surface patterns of the samples were observed by scaning electron microscope(SEM).XRD and EDS were used for a study of coating structure and component.Over 30 vol.% Ti_3SiC_2 particle was co-deposited within nickel plating by a intermittent stirring.The micro hardness of the composites coating was also studied,which was increased with the increasing Ti_3SiC_2 particle content.; 国家自然科学基金委员会资助(50232020,50572042) |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://hdl.handle.net/123456789/61749] |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 韩若冰,石随林,吴瑞芬,等. 电沉积法制备Ni-Ti_3SiC_2复合镀层[J],2010, 2010. |
APA | 韩若冰.,石随林.,吴瑞芬.,潘伟.,Han Ruobing.,...&Pan Wei.(2010).电沉积法制备Ni-Ti_3SiC_2复合镀层.. |
MLA | 韩若冰,et al."电沉积法制备Ni-Ti_3SiC_2复合镀层".(2010). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论