| 先进陶瓷胶态成型新工艺的研究进展(英文) | |
| 黄勇 ; 张立明 ; 杨金龙 ; 谢志鹏 ; 汪长安 ; 陈瑞峰 ; HUANG Yong ; ZHANG Liming ; YANG Jinlong ; XIE Zhipeng ; WANG Chang'an ; Chen Ruifeng | |
| 2010-06-10 ; 2010-06-10 | |
| 关键词 | 胶态成型新工艺 凝胶注模成型 水基凝胶流延成型 陶瓷浓悬浮体 原位固化 new colloidal forming processes gel-casting aqueous gel-tape-casting concentrated ceramic suspensions in-situ solidification TQ174.6 |
| 其他题名 | RESEARCH PROGRESS OF NEW COLLOIDAL FORMING PROCESSES FOR ADVANCED CERAMICS |
| 中文摘要 | 总结了先进陶瓷胶态成型新工艺在清华大学的研究进展。简要介绍了几种高固相含量的浓悬浮体和高质量坯体的制备新技术,提出胶态成型新工艺固化机制的新见解。采用新工艺去除坯体中缺陷,实现高可靠性、复杂形状高性能陶瓷部件低成本的自动化、批量化制备,为先进陶瓷产业化铺平了道路。; The progress of new colloidal forming processes for high performance ceramics developed in Tsinghua University is re-viewed.Several new techniques for preparing highly concentrated ceramic suspensions and high-quality green bodies are briefly de-scribed,and new ideas about ceramic colloidal forming are introduced.With these new techniques,high performance ceramic parts with high reliability and complex shapes can be mass prepared,by automation,at low cost and after the removal of defects in ceramic green bodies.This may pave the way for the industrialization of advanced ceramics in the near future.; 国家自然科学基金(50232010); 国家“863”计划(863-715-606-0100); 国家“973”计划(G200067204)资助项目~~ |
| 语种 | 英语 ; 英语 |
| 内容类型 | 期刊论文 |
| 源URL | [http://hdl.handle.net/123456789/61367]  |
| 专题 | 清华大学 |
| 推荐引用方式 GB/T 7714 | 黄勇,张立明,杨金龙,等. 先进陶瓷胶态成型新工艺的研究进展(英文)[J],2010, 2010. |
| APA | 黄勇.,张立明.,杨金龙.,谢志鹏.,汪长安.,...&Chen Ruifeng.(2010).先进陶瓷胶态成型新工艺的研究进展(英文).. |
| MLA | 黄勇,et al."先进陶瓷胶态成型新工艺的研究进展(英文)".(2010). |
| 个性服务 |
| 查看访问统计 |
| 相关权益政策 |
| 暂无数据 |
| 收藏/分享 |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论