QQ客服 官方微博 反馈留言

	大应变量冷轧金属Ni再结晶过程中∑3晶界演化
	张玉彬 ; A.Godfrey ; 刘伟 ; 刘庆 ; ZHANG Yubin ; A.Godfrey ; LIU Wei ; LIU Qin
	2010-06-10 ; 2010-06-10
关键词	Ni 电子背散射衍射 再结晶 ∑3晶界 晶界工程 Ni electron backscattered diffraction(EBSD) recrystallization ∑3 boundary grain boundary engineering(GBE) TG335.12 TG111.7
其他题名	EVOLUTION OF∑3 BOUNDARIES DURING RECRYSTALLIZATION OF COLD-ROLLED NICKEL DEFORMED TO HIGH STRAIN
中文摘要	应用电子背散射衍射技术(EBSD)和电子通道衍衬成像技术(ECC)研究了大应变量(96%)冷轧纯度为99.996%的金属Ni在低温再结晶过程中∑3晶界的演化.研究表明,基于EBSD数据,∑3晶界可以分为两类——孪晶型和非孪晶型∑3晶界,二者可通过晶界取向差与60°〈111〉的偏差△θ来区分.EBSD定位观察再结晶过程的结果表明,非共格孪晶是由共格孪晶发展而来;绝大部分∑3~n(n>1)晶界由晶核与其n次孪晶相遇而形成,并且晶界含量随着n的增加显著降低.大部分非孪晶型∑3晶界由孪晶型∑3晶界与小角晶界(∑1)相遇反应而来,可能比孪晶型∑3晶界更能够阻断大角晶界网络.; The concept of grain boundary engineering(GBE) has been proposed based on the fact that many studies have demonstrated that boundaries associated with low∑-value coincident site lattice(CSL) misorientations show higher resistance to intergranular fracture and corrosion,reduced susceptibility to impurity segregation and superior ductility.It is commonly accepted that for fcc metals of low to medium stacking fault energy metals,including Ni and many Ni-alloys,the most important CSL boundary for the GBE process is a∑3 boundary,the occurrence of which is dominated by the formation of annealing twins.Moreover,it has been found that repetitive thermo-mechanical processing can be used to increase further the fraction of∑3(and∑3~n(n>1)) boundaries.However, the mechanism for this is not yet clear.Therefore,an investigation on the evolution of∑3 boundaries during recrystallization is important for understanding the mechanisms of GBE for those materials. In the present paper the evolution of∑3 boundaries during recrystallization in a 96%cold-rolled sample of pure nickel of 99.996%purity has been explored using orientation maps obtained using electron backscatter diffraction(EBSD).Each orientation map was taken from the same area after annealing for various times.Based on the EBSD data the∑3 boundaries can be divided into two groups:"twin"type and"non-twin"type.These groups can be differentiated using a parameter of deviation angle(Δθ) of boundary misorientation to the ideal twin misorientation(60°〈111〉).During recrystallization incoherent twin boundaries are found to develop from coherent twin boundaries.It is found also that most∑3~n(n>1) boundaries are formed by impingement of a nucleus with its n-order twins,and that the chance for such impingement events decreases significantly with increasing n.Most non-twin type∑3 boundaries arise from impingement of∑1 and twin type∑3 boundaries.Non-twin type∑3 boundaries may be more effective than twin type∑3 boundaries to develop a beneficial grain boundary network.; 国家自然科学基金资助项目50671052和50620130096~~
语种	中文 ; 中文
内容类型	期刊论文
源URL	[http://hdl.handle.net/123456789/61107]
专题	清华大学
推荐引用方式 GB/T 7714	张玉彬,A.Godfrey,刘伟,等. 大应变量冷轧金属Ni再结晶过程中∑3晶界演化[J],2010, 2010.
APA	张玉彬.,A.Godfrey.,刘伟.,刘庆.,ZHANG Yubin.,...&LIU Qin.(2010).大应变量冷轧金属Ni再结晶过程中∑3晶界演化..
MLA	张玉彬,et al."大应变量冷轧金属Ni再结晶过程中∑3晶界演化".(2010).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。