| 超高频RFID读写器基带处理器的设计 | |
| 陈逆 ; 张春 ; 王敬超 ; Chen Ni ; Zhang Chun ; Wang Jingchao | |
| 2010-06-09 ; 2010-06-09 | |
| 关键词 | 读写器 ISO/IEC18000-6C 数字基带 在线调试 interrogator ISO/IEC 18000-6C digital baseband on-line debugging TP391.44 |
| 其他题名 | Design of an UHF RFID Interrogator Baseband Processor |
| 中文摘要 | 为实现单芯片的超高频读写器,提出了一种读写器基带处理器的设计方案。设计采用了微处理器IP核在AFS600上搭建一个读写器数字基带,在原本不支持调试模式的微处理器上扩展了片上调试功能,为集成开发环境Keil开发出动态链接库实现了对数字基带的在线调试。为实现ISO/IEC18000-6C协议,用硬件实现了收发通路原型,并在AFS600平台上完成了FPGA验证。设计采用TSMC0.25μm Embedded Flash工艺完成了芯片的版图设计。该基带处理器实现了读写器基带和标签的正常通信,为最终实现单芯片读写器创造了条件。; A novel mechanism of implementing an UHF RFID interrogator baseband processor was proposed to implement an UHF reader on a single chip.A microprocessor IP core was used in AFS600 to build a digital baseband of reader,on-chip debugging was developed in original microprocessor which objects to debugging mode,and a special DLL was developed to realize on-line debugging of baseband processor for IDE Keil.To realize ISO/IEC 18000-6C protocol,a transceiver pathway prototype was implemented by hardware and accomplished FPGA verification on AFS600 platform.Finally,the layout was finished using TSMC 0.25 μm Embedded Flash process.This baseband processor realizes normal communication between interrogator and tag,and is well prepared to achieve a single-chip interrogator.; 国家高技术研究发展计划(863计划)(60676012) |
| 语种 | 中文 ; 中文 |
| 内容类型 | 期刊论文 |
| 源URL | [http://hdl.handle.net/123456789/56771]  |
| 专题 | 清华大学 |
| 推荐引用方式 GB/T 7714 | 陈逆,张春,王敬超,等. 超高频RFID读写器基带处理器的设计[J],2010, 2010. |
| APA | 陈逆,张春,王敬超,Chen Ni,Zhang Chun,&Wang Jingchao.(2010).超高频RFID读写器基带处理器的设计.. |
| MLA | 陈逆,et al."超高频RFID读写器基带处理器的设计".(2010). |
| 个性服务 |
| 查看访问统计 |
| 相关权益政策 |
| 暂无数据 |
| 收藏/分享 |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论