一种高速高精度采样/保持电路 | |
杨斌 ; 殷秀梅 ; 杨华中 ; Yang Bin ; Yin Xiumei ; Yang Huazhong | |
2010-06-09 ; 2010-06-09 | |
关键词 | 采样/保持电路 自举开关 增益自举放大器 sample-and-hold circuit bootstrapped switch gain-boosting operational amplifier TN792 |
其他题名 | A High-Speed High-Resolution Sample-and-Hold Circuit |
中文摘要 | 介绍了一种用于12bit,100MS/s流水线模数转换器前端的采样/保持电路的设计.该电路在3V电源电压100MHz采样频率时,输入直到奈奎斯特频率仍能够达到108dB的无杂散动态范围(SFDR)和77dB的信躁比(SNR).论文建立了考虑开关之后的采样保持电路的分析模型,并详细研究了电路中开关组合对电路性能的影响,同时发现了传统的栅源自举开关(bootstrapped switch)中存在的漏电现象并对其进行了改进,极大地减小了漏电并提高了电路的线性性能.; A high performance CMOS sample and hold(S/H)circuit for use in the front end of a 12bit 100MS/s ADC is presented.It achieves a 108dB spurious-free dynamic range and 77dB signal-to-noise ratio over the Nyquist band at a 100MHz sampling frequency with a 3V power supply.An analysis model for the S/H circuit is built to capture the switching effect.The impact of the switches' arrangement is also addressed.The leakage in a conventional bootstrapped switch is analyzed and some improvements are made,enhancing the linearity significantly.; 国家自然科学基金资助项目(批准号:90207001)~~ |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://hdl.handle.net/123456789/53867] |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 杨斌,殷秀梅,杨华中,等. 一种高速高精度采样/保持电路[J],2010, 2010. |
APA | 杨斌,殷秀梅,杨华中,Yang Bin,Yin Xiumei,&Yang Huazhong.(2010).一种高速高精度采样/保持电路.. |
MLA | 杨斌,et al."一种高速高精度采样/保持电路".(2010). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论