QQ客服 官方微博 反馈留言

	Numerical Simulations and Analyses of Temperature Control Loop Heat Pipe for Space CCD Camera
	Meng, Q. L., Yang, T. and Li, C. L.1
	2016
关键词	Loop heat pipe Temperature control Numerical simulation and analyses Heat and mass transfer Space CCD camera capillary pumped loop Thermodynamics
中文摘要	This paper deals with the output improvement of heating and cooling cycle by using the work-fluid including phase change material. The experimental study is carried out by heat exchange between work-fluid and heat transfer surface. The work-fluid is flown to a high temperature or a low temperature heat transfer surface from the narrow path. In order to increase the amount of the heat transmission, a trace of Diethylether (boiling point 34.8 degrees C), as a phase change material (PCM), is added to the work-fluid. The parameters of the experiment are additive amount of PCM, the rotational speed of the displacer piston and the temperature of heat transfer surface. It is clarified that the increasing of engine cycle output is brought by the PCM addition. The effect of PCM addition is evaluated by output ratio which is defined from the experimental cycle output data. The requirements for acquiring the increasing effect of output by adding PCM are clarified.
内容类型	期刊论文
源URL	[http://ir.etp.ac.cn/handle/311046/113051]
专题	工程热物理研究所_Journal of Thermal Science_期刊论文
作者单位	1.[Meng Qingliang 2.Yang Tao 3.Li Chunlin] Beijing Inst Space Mech Elect, Beijing 100094, Peoples R China.
推荐引用方式 GB/T 7714	Meng, Q. L., Yang, T. and Li, C. L.. Numerical Simulations and Analyses of Temperature Control Loop Heat Pipe for Space CCD Camera[J],2016.
APA	Meng, Q. L., Yang, T. and Li, C. L..(2016).Numerical Simulations and Analyses of Temperature Control Loop Heat Pipe for Space CCD Camera..
MLA	Meng, Q. L., Yang, T. and Li, C. L.."Numerical Simulations and Analyses of Temperature Control Loop Heat Pipe for Space CCD Camera".(2016).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。