Case study: Analysis of the characteristics of the damage to Dujiatai low-permeability reservoir by water injection and research of damage removal methods | |
Zhao ZC; Liu W | |
2008 | |
会议名称 | SPE International Symposium and Exhibition on Formation Damage Control 2008 |
会议日期 | February 13, 2008 - February 15, 2008 |
会议地点 | Lafayette, LA, United states |
关键词 | Borehole walls Natural energy Permeability reservoirs |
中文摘要 | Dujiatai reservoir has an oil bearing area of 37.2km2 with the OIP of 2409×104t, burial depth of -2650~-2960m, porosity of 15.1% and permeability of 37.7×10-3 μm-2. In general, the reservoir is produced initially under natural energy by elastic drive and solution gas drive and development with water injection is tested in the later stage due to fast pressure decline and subsequent substantial production decline. During the water injection field test, although the water to be injected had been filtered to a fine degree, the water injection pressure increased substantially after a short time and water injection became difficult and some of the injectors were forced to be shut in because no water could be injected. The paper introduces the analysis results of the tests on water injection damage to Dujiatai low permeability reservoir. (1) Solid particles entered the reservoir, forming blockage due to the small throats of filtration with the average radius of the throats of about 1.0μm; (2) Because the injected water was not treated against swelling, clay swelled, forming blockage due to the medium to strong water sensitivity of the reservoir; (3) Because of the medium to strong velocity sensitivity of the reservoir, fine particles staying in a unconsolidated manner on the borehole walls or inner surface of the base rocks fell out, migrated and piled up at the throats, forming blockage; (4) The scaling tendency of CaCO3 of the injected water was obvious and the scales adhered to the inner surface of the throats, reducing the filtration radius of the throats; (5) The water injection pipeline was corroded seriously and the suspended particle content at the outlet of the filtering station reached the standard, but it exceeded the standard after going through the water injection pipeline and reaching the wellhead and it was even worse when it reached the bottom of the well. The solutions for the water injection damage to Dujiatai low permeability reservoir are as follows. (1) Acidization or acid fracturing deeper into the formations with weak acids is conducted to erode the unstable migrating particles; (2) Antiswelling agent is added to the injecting water to reduce clay swelling; (3) A secondary filtering unit is set up at the wellhead or the water injection pipeline is replaced with a corrosion prevention pipeline lined with fiberglass. Copyright 2008, Society of Petroleum Engineers. |
收录类别 | EI |
会议网址 | https://doi.org/10.2118/112184-MS |
会议录 | Proceedings - SPE International Symposium on Formation Damage Control |
语种 | 英语 |
内容类型 | 会议论文 |
源URL | [http://dspace.imech.ac.cn/handle/311007/60309] |
专题 | 力学研究所_力学所知识产出(1956-2008) |
推荐引用方式 GB/T 7714 | Zhao ZC,Liu W. Case study: Analysis of the characteristics of the damage to Dujiatai low-permeability reservoir by water injection and research of damage removal methods[C]. 见:SPE International Symposium and Exhibition on Formation Damage Control 2008. Lafayette, LA, United states. February 13, 2008 - February 15, 2008.https://doi.org/10.2118/112184-MS. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论