A 1-D Lumped Theoretical Model for CMUT | |
Wenchao Zhou ; Ting Yu ; Fengqi Yu | |
2008 | |
会议名称 | Proceedings of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2008 |
英文摘要 | It is always difficult to optimize parameters of capacitive micromachined ultrasonic transducers (CMUT) because of high computational time cost of Finite Element Method (FEM) analysis and economic cost of prototype manufacturing. Thus a theoretical model is required in designing a CMUT. This paper presents such a 1-D lumped model A transfer function between output sound pressure and input AC voltage has been deduced based on control theory. This model makes it easier to optimize the parameters of a CMUT with respect to output sound pressure and bandwidth and to understand the influence of each parameter. To derive the proposed 1-D model, transition from a 3-D CMUT device to 1-D lumped model is performed by FEM analysis. Finally a typical example is given for verification. The result obtained by the proposed 1-D lumped model is compared to that by 3-D FEM simulation. It shows that our proposed 1-D lumped model can be used to study the behavior of CMUT at much lower computational cost without losing accuracy. |
收录类别 | EI |
语种 | 英语 |
内容类型 | 会议论文 |
源URL | [http://ir.siat.ac.cn:8080/handle/172644/2184] |
专题 | 深圳先进技术研究院_集成所 |
推荐引用方式 GB/T 7714 | Wenchao Zhou,Ting Yu,Fengqi Yu. A 1-D Lumped Theoretical Model for CMUT[C]. 见:Proceedings of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2008. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论