QQ客服 官方微博 反馈留言

	Application of MEMS gyroscopes and accelerometers in FSM stabilization
	Tian, Jing1,2,3,4; Yang, Wenshu1; Peng, Zhenming2; Deng, Chao1,3,4
	2015
会议名称	Proceedings of SPIE - The International Society for Optical Engineering
会议日期	2015
卷号	9677
页码	96772K
中文摘要	Gimbals and Fast steering mirrors (FSMs) are commonly used to stabilize the line-of-sight (LOS) of the electro-optical tracking system mounted on moving platforms. The gimbal is used to restrain the vibration of low frequencies, and the FSM is used to restrain the vibration of high frequencies. The restraining performance of the Electro-Optical tracking system is equal to the multiplication of the restraining performance of the gimbal and the FSM. The vibration of high frequencies is mainly restrained by the FSM, and so the performance of the FSM is very important to the Electro-Optical tracking system. There are two ways to improve the stabilization accuracy and bandwidth of the FSM, one way is to improve the accuracy and bandwidth of inertial sensors, and the other way is to use low weight inertial sensors to reduce the load of FSM and increase the mechanical resonance frequency. And so the inertial sensors of high accuracy, high bandwidth and low weight are the key to improve the stabilization accuracy and bandwidth of the FSM. © 2015 SPIE.
英文摘要	Gimbals and Fast steering mirrors (FSMs) are commonly used to stabilize the line-of-sight (LOS) of the electro-optical tracking system mounted on moving platforms. The gimbal is used to restrain the vibration of low frequencies, and the FSM is used to restrain the vibration of high frequencies. The restraining performance of the Electro-Optical tracking system is equal to the multiplication of the restraining performance of the gimbal and the FSM. The vibration of high frequencies is mainly restrained by the FSM, and so the performance of the FSM is very important to the Electro-Optical tracking system. There are two ways to improve the stabilization accuracy and bandwidth of the FSM, one way is to improve the accuracy and bandwidth of inertial sensors, and the other way is to use low weight inertial sensors to reduce the load of FSM and increase the mechanical resonance frequency. And so the inertial sensors of high accuracy, high bandwidth and low weight are the key to improve the stabilization accuracy and bandwidth of the FSM. © 2015 SPIE.
收录类别	SCI ; EI
学科主题	Accelerometers - Gyroscopes - Inertial navigation systems - MEMS - Mirrors - Optical testing - Stabilization - Tracking (position)
语种	英语
ISSN号	0277-786X
内容类型	会议论文
源URL	[http://ir.ioe.ac.cn/handle/181551/7425]
专题	光电技术研究所_光电工程总体研究室（一室）
作者单位	1.Institute of Optics and Electronics, Chinese Academy of Science, Chengdu, China 2.School of Opto-Electronic Information, University of Electronic Science and Technology of China, Chengdu, China 3.Key Laboratory of Optical Engineering, Chinese Academy of Sciences, Chengdu, China 4.University of Chinese Academy of Sciences, Beijing, China
推荐引用方式 GB/T 7714	Tian, Jing,Yang, Wenshu,Peng, Zhenming,et al. Application of MEMS gyroscopes and accelerometers in FSM stabilization[C]. 见:Proceedings of SPIE - The International Society for Optical Engineering. 2015.

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。