CORC  > 金属研究所  > 中国科学院金属研究所
Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing
S. Qu ; C. X. Huang ; Y. L. Gao ; G. Yang ; S. D. Wu ; Q. S. Zang ; Z. F. Zhang
SourceMaterials Science and Engineering a-Structural Materials Properties Microstructure and Processing
2008
Volume475Issue:1-2Pages:207-216
KeywordAISI 304L stainless steel equal channel angular pressing (ECAP) compression tension mechanical properties fracture modes severe plastic-deformation large-strain deformation bulk metallic-glass mechanical-properties grain-refinement tension/compression asymmetry ti alloy pure ti al microstructures
ISSN0921-5093
AbstractThe present work investigated the compressive and tensile properties of AISI 304L austenitic stainless steel subjected to equal channel angular pressing (ECAP) at high temperature (700 degrees C). Tensile and compressive strength, elongation, Vickers hardness and fracture mode of annealed and ECAPed material were systematically compared. It is found that with increasing the number of ECAP passes the tensile strength and hardness increase, however, the elongation and strain hardening rate decrease. The compressive yield strength and strain hardening rate displayed obvious anisotropy when the ECAPed austenitic stainless steel was compressed along different orientations. The tensile fracture mode was changed from the ductile to brittle feature with increasing the number of ECAP passes. Accordingly, the ECAPed steel exhibited apparent asymmetry in tensile and compressive properties. Besides, the relationship between strength and Vickers hardness was established. Based on the results above, the corresponding deformation and fracture mechanisms were discussed. (c) 2007 Published by Elsevier B.V.
Related URLs://WOS:000253693100037
Available Date2012-04-13
Content Type期刊论文
源URL[http://210.72.142.130/handle/321006/33057]  
Collection金属研究所_中国科学院金属研究所
Recommended Citation
GB/T 7714
S. Qu,C. X. Huang,Y. L. Gao,et al. Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2008,475(1-2):207-216.
APA S. Qu.,C. X. Huang.,Y. L. Gao.,G. Yang.,S. D. Wu.,...&Z. F. Zhang.(2008).Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,475(1-2),207-216.
MLA S. Qu,et al."Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 475.1-2(2008):207-216.
Related Services
Usage statistics
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.


©版权所有 ©2017 CSpace - Powered by CSpace